LG WTG6520 - User Manual

6 AU • Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service personnel if you are in doubt as to whether the appliance is properly grounded. • Do not modify the power cord provided with the appliance. Operation • ...

8 AU • Do not use a plug socket and wiring equipment for more than their rated capacity. • When the air temperature is high and the water temperature is low, condensation may occur and thus wet the floor. • Wipe off dirt or dust on the contacts of the power plug. • Under certain conditions hydrogen ...

9 AU Disposal • Before discarding an old appliance, unplug it. Cut off the cable directly behind the appliance to prevent misuse. • Dispose of all packaging materials (such as plastic bags and styrofoam) away from children. The packaging materials can cause suffocation. • Remove the door before disp...

10 INSTALLATION Parts Door Tempered Glass Dispenser Drawer Softener Dispenser Bleach Dispenser Lint Filter Drum Leveling Feet Drain hose Water Supply Hose 1 2 3 4 5 6 7 8 9 10 Accessories (Depending on Model) or or or Tie strap (some countries only) 2 water supply hoses (Hot + Cold) Drain hose Anti-...

11 AU Specifications Model WTG6520 Power Supply 220 - 240 V~, 50 Hz Size 590 mm (W) x 606 mm (D) x 960 mm (H) Product Weight 42 .0 kg Allowable water pressure 30 - 600 kPa Max. capacity 6.5 kg • Appearance and specifications may change without notice to improve the quality of the product.

12 AU Installation Place Requirements Location 10 cm 2 cm 2 cm Level floor : Allowable slope under the entire appliance is 1°. Power outlet : Must be within 1.5 meters of either side of the location of the appliance. • Do not overload the outlet with more than one appliance. Additional Clearance : F...

13 AU Connecting the Supply Hose • Before connecting the water supply hose to the water tap, check the hose type and then choose the correct instruction. • The water supply hose supplied may vary from country to country. Make sure to connect the blue supply hose to the COLD water tap, and the orange...

15 AU Connecting the Inlet Hoses to the Appliance Attach the hot water line to the hot water inlet on the back of the washing machine. Attach the cold water line to the cold water inlet on the back of the washing machine. NOTE • After completing connection, if water leaks from the hose, repeat the s...

17 AU Leveling the Appliance If the floor is uneven, turn the adjustable feet as required (Do not insert pieces of wood etc. under the feet). Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level. Diagonal Check • When pushing down the ...

18 OPERATION AU Using the Appliance Before the first wash, select a washing programme (Cotton Wash, add a half load of detergent), allow the washing machine to wash without clothing. This will remove residue and water from the drum that may have been left during manufacturing. 1 Sort laundry and loa...

19 AU Sorting Laundry 1 Look for the care label on your clothes. • This will tell you about the fabric content of your garment and how it should be washed. • Symbols on the care labels. [Wash temperature] [Normal machine wash] [Permanent press] [Delicate] [Hand wash] [Do not wash] 2 Sorting laundry....

20 AU Adding Cleaning Products Detergent Dosage • Detergent should be used according to the instruction of the detergent manufacturer and selected according to type, colour, soiling of the fabric and washing temperature. • If too much detergent is used, too many suds can occur and this will result i...

21 AU Adding Fabric Softener • Dilute fabric softener with water. Undiluted fabric softener may result in spots that look like oil stains. • Measure and add the recommended amount of fabric softener into the compartment marked with this symbol ( ). − Follow manufacturer’s direction. − Fabric softene...

22 AU Control Panel Power Button • Press the Power button to turn the washing machine on, or off if washing hasn't commenced. • The appliance will automatically turn off once a certain time has passed after the wash has completed. Start/Pause Button • Press the Start/Pause button to start the wash c...

23 AU Washing Programme Wash cycles are designed for the best wash performance for each type of load. Select the programme that best matches the load contents for maximum wash performance and fabric care. Press the Program button to select the desired programme. When you select a wash programme, the...

24 AU Silent Use this programme to wash quietly in silent especially during late night and dawn. • This programme has a longer washing time than the Normal programme. • To reduce noise in spinning, this programme uses a slow spin to extract water from laundry, so the clothes will have more moisture ...

25 AU Option Programme Soil Level • This button allows you to select the strength of the wash action. • There are 2 levels for Soil Level selection : Heavy and Light. This can be selected for any programme. • If you do not select the Soil Level, it will be in the Normal state with the light turned o...

26 AU Delay • You can set a time delay so that the washing machine will start automatically and finish after a specified time interval. 1 Press the Power button. 2 Select a washing programme. 3 Press the Delay button to set the required Delay ending time. 4 Press the Start/Pause button. NOTE • The d...

27 AU Manual Washing Rinse/Spin, Spin, Rinse, or Wash cycles can be set manually. Rinse, Spin Spin only Rinse only Wash only 1 or Press the Power button. 2 Press the Rinse button. Press the Spin button. Press the Rinse button. Press the Wash button. 3 Rinse and Spin are automatically selected. Press...

28 AU Special Functions Child Lock Use this option to disable the controls. This feature can prevent children from changing programmes or operating the appliance. Locking the Control Panel 1 Press and hold the Temp. and Rinse buttons simultaneously for 3 seconds. 2 ' ' and the remaining time are alt...

29 SMART FUNCTIONS AU Using Smart Diagnosis™ Smart Diagnosis™ Through the Customer Information Centre Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails. Use this function only to contact the service represent...

30 MAINTENANCE AU WARNING • Unplug the washing machine before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the washing machine. They may ...

31 AU Cleaning the Water Inlet Filter • Turn off the supply taps to the machine if the washing machine is to be left for any length of time (e.g. holiday), especially if there is no floor drain (gully) in the immediate vicinity. • ’ ' error message will be displayed on the control panel when water i...

33 AU Caution on Freezing During Winter • When frozen, the product does not operate normally. Make sure to install the product where it will not freeze during winter. • In case the product must be installed outside on a porch or in other outdoor conditions, make sure to check the following. How to K...

34 TROUBLESHOOTING AU The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If the appliance does not function properly or does not function at all, check the following before you call for service: Diagnosing Problems Symptoms Reason S...

38 AU Error Messages Symptoms Reason Solution The door is not closed properly. • Close the door completely. If the error code is not released, call for service. Door lock switch error. • Check nothing is caught under the door, including shipping materials or lothing. • Close the door completely. If ...