LG WDC1475NCW - User Manual

5 EN • This appliance must not be installed behind a lockable door, a sliding door or a door with a hinge on the opposite side to that of the appliance, in such a way that a full opening of the appliance door is restricted. • This appliance must be earthed / grounded via the mains supply lead. In th...

7 EN • Do not touch the power plug or the appliance controls with wet hands. • Do not bend the power cable excessively or place a heavy object on it. • Do not wash rugs, mats, shoes or pet blankets, or any other items other than clothes or sheets, in this machine. • This appliance must only be used ...

8 EN Maintenance • Securely plug the power plug in the outlet socket after completely removing any moisture and dust. • Disconnect the appliance from the power supply before cleaning the appliance. Setting the controls to the OFF or stand by position does not disconnect this appliance from the power...

9 EN Safety introductions for use • Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and should not be placed in a tumble dryer. Warning to avoid a fire. Do not wash clothes or items that have any contaminants of flammable solvents or substances. Do not c...

10 EN Disposal of Your Old Appliance • This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream. • Old electrical products can contain hazardous substances so correct disposal of your old appli...

11 INSTALLATION EN Parts 1 Transit bolts (x 4) 2 Power plug 3 Drawer 4 Control panel 5 Drum 6 Door 7 Drain hose 8 Drain tube 9 Drain pump filter 10 Cover cap (Location may vary depending on products) 11 Adjustable feet (x 4) Accessories Cold supply hose (1 EA) (Option: Hot (1 EA)) Spanner Caps for c...

12 EN Specifications Model WDC1475NCW Wash Capacity 7.5 kg (Wash) / 4 kg (Dry) Power Supply 220 - 240 V~, 50 Hz Size 600 mm (W) x 560 mm (D) x 850 mm (H) Product Weight 68 kg Permissible Water pressure 100 ~ 800 kPa (1.0 - 8.0 kgf / cm²) • Appearance and specifications may change without notice to i...

13 EN Installation Place Requirements Location 2 cm 0.5 cm 2 cm 10 cm Level floor : Allowable slope under the entire appliance is 1°. Power outlet : Must be within 1 meter of either side of the location of the appliance. • Do not overload the outlet with more than one appliance. Additional Clearance...

14 EN Unpacking and Removing Transit Bolts 1 Lift the appliance off the foam base. • After removing the carton and shipping material, lift the appliance off the foam base. Make sure the tub support comes off with the base and is not stuck to the bottom of the appliance. • If you must lay the applian...

15 EN Using Anti-Slip Sheets (Optional) If you install the appliance on a slippery surface, it may move because of excessive vibration. Incorrect leveling may cause malfunction through noise and vibration. If this occurs, install the anti-slip sheets under the leveling feet and adjust the level. 1 C...

16 EN Leveling the Appliance If the floor is uneven, turn the adjustable feet as required (Do not insert pieces of wood etc. under the feet). Make sure that all four feet are stable and resting on the floor and then check that the appliance is perfectly level (Use a spirit level). • Once the applian...

17 EN Connecting Hose to Water Tap Connecting Screw-Type Hose to a Tap with a Thread. Screw the hose connector onto the water supply tap. Connecting Screw-Type Hose to Tap Without Thread 1 Loose the four fixing screws. Upper connector Rubber seal Fixing screw 2 Remove the guide plate if the tap is t...

18 EN 3 Push the adapter onto the end of the tap so that the rubber seal forms a watertight connection. Tighten the four fixing screws and the adapter ring plate. 4 Pull the connector latch plate down, push the supply hose onto the adapter, and release the connector latch plate. Make sure the adapte...

19 EN Installing the Drain Hose • The drain hose should not be placed higher than 100 cm above the floor. Water in the appliance may not drain or may drain slowly. • Securing the drain hose correctly will protect the floor from damage due to water leakage. • If the drain hose is too long, do not for...

20 OPERATION EN Using the Washing Machine Before the first wash, select a washing programme, allow the washing machine to wash without clothing. This will remove residue and water from the drum that may have been left during manufacturing. 1 Sort laundry and load items. • Sort laundry by fabric type...

21 EN Sorting Laundry 1 Look for a care label on your clothes. • This will tell you about the fabric content of your garment and how it should be washed. • Symbols on the care labels. Wash temperature Normal machine wash Permanent press Delicate Hand wash Do not wash 2 Sorting laundry. • To get the ...

22 EN Adding Cleaning Products Detergent Dosage • Detergent should be used according to the instruction of the detergent manufacturer and selected according to type, colour, soiling of the fabric and washing temperature. • If too much detergent is used, too many suds can occur and this will result i...

23 EN • Do not leave the fabric softener in the detergent drawer for more than 2 days (Fabric softener may harden). • Softener will automatically be added during the last rinse cycle. • Do not open the drawer when water is being supplied. • Solvents (benzene, etc.) must not be used. NOTE • Do not po...

24 EN Control Panel 1 Power Button • Press the Power button to turn the washing machine on. 2 Start/Pause Button • This Start/Pause button is used to start the wash cycle or pause the wash cycle. • If a temporary stop of the wash cycle is needed, press the Start/Pause button. 3 Display • The display...

25 EN Programme Table Washing Programme Programme Description Fabric Type Proper Temp. Maximum Load Cotton Provides better performance by combining various drum motions. Coloured fast garments (shirts, nightdresses, pajamas, etc.) and normally soiled cotton load (underwear). 40 °C (Cold to 95 °C) Ra...

27 EN Drying Programme Programme Description Fabric Type Maximum Load Normal ( ) For cottons. Select this programme to reduce the drying time and energy usage during dry cycle. Cotton or linen fabrics such as cotton towels, T-shirts, and linen laundries. Rating Energy Dry ( ) For energy dry programm...

28 EN Extra Options Programme Rinse+ Delay End Crease Care Pre Wash Dry Cotton ● ● ● ● ● Cotton Eco ● ● ● ● ● Easy Care ● ● ● ● ● Mix ● ● ● ● ● Hygiene ● ● ● ● Baby Care ● ● ● ● Wash+Dry (4kg) ● ● ● ● * Duvet ● ● ● Sports Wear ● ● ● Q.Wash+Dry ● ● * Quick 30 ● ● ● ● ● Wool Plus ● ● ● Heavy Stain ● ●...

29 EN Operating Data Programme Max RPM Cotton 1400 Cotton Eco 1400 Easy Care 1000 Mix 1400 Hygiene 1400 Baby Care 1000 Wash+Dry (4kg) 1400 Duvet 1000 Sports Wear 800 Q.Wash+Dry 1000 Quick 30 1400 Wool Plus 800 Heavy Stain 1400

30 EN Option Programme Delay End You can set a time delay so that the washing machine will start automatically and finish after a specified time interval. 1 Press the Power button. 2 Select a washing programme. 3 Press the Delay End button to set time required. 4 Press the Start/Pause button. NOTE •...

31 EN Temp. The Temp. button selects the wash and rinse temperature combination for the selected programme. Press this button until the desired setting is lit. All rinses use cold tap water. • Select the water temperature suitable for the type of load you are washing. Follow the garment fabric care ...

32 EN Child Lock ( ) Use this option to disable the controls. This feature can prevent children from changing cycles or operating the appliance Locking the Control Panel 1 Press and hold the Child Lock button for 3 seconds. 2 A beeper will sound, and will appear on the display.When the Child Lock is...

33 EN Dry Use the automatic programmes to dry most loads. Electronic sensors measure the temperature of the exhaust to increase or decrease drying temperatures for faster reaction time and tighter temperature control. • Cold water tap must be left on during drying programmes. • This washing machine’...

34 EN Drying Time Guide • The drying time can be selected by pressing the Dry button. • Drying programme can last up to about 7 hours. • These drying times are given as a guide to help you set your washing machine for manual drying. NOTE • The estimated drying time varies from the actual drying time...

35 SMART FUNCTIONS EN Using Smart ThinQ Application Installing Smart ThinQ Search for the LG Smart ThinQ application from the Google Play Store on a smart phone. Follow instructions to download and install the application. Tag On Function • For appliances with the logo • The Tag On function can only...

36 EN Smart Diagnosis™ Using a Smart Phone • For appliances with the or logo Use this function if you need an accurate diagnosis by an LG Electronics customer information centre when the appliance malfunctions or fails.Smart Diagnosis™ can not be activated unless the appliance is connected to power....

37 MAINTENANCE EN WARNING • Unplug the washing machine before cleaning to avoid the risk of electric shock. Failure to follow this warning may result in serious injury, fire, electric shock, or death. • Never use harsh chemicals, abrasive cleaners, or solvents to clean the washing machine. They may ...

40 EN Caution on Freezing During Winter • When frozen, the product does not operate normally. Make sure to install the product where it will not freeze during winter. • In case the product must be installed outside on a porch or in other outdoor conditions, make sure to check the following. How to K...

41 EN How to Handle Freezing • Make sure to empty the drum, pour warm water of 50–60 °C up to the rubber part inside the drum, close the door, and wait for 1–2 hours. 50-60 °C CAUTION • When the drain hose is installed in a curved shape, the inner hose may freeze. • Open the cover cap and hose plug ...

42 TROUBLESHOOTING EN • Your washing machine is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. If your washing machine does not function properly or does not function at all, check the following before you call for service: Diagnosing Problems S...

45 EN Error Messages Symptoms Reason Solution Water supply is not adequate in area. • Check another tap in the house. Water supply taps are not completely open. • Fully open tap. Water supply hose(s) are kinked. • Straighten hose(s). The filter of the supply hose(s) are clogged. • Check the filter o...