LG LRV5900 - User Manual

4 SAFETY PRECAUTIONS In rare cases, the HOM-BOT’s brush can damage the carpet. If this hap- pens, immediately stop the cleaning operation. When a carpet has long tassels, the tassels can be damaged. Do not allow the HOM-BOT to sweep up liquids, blades, thumb tacks, kindling, etc. These items can cau...

5 INCLUDED WITH PRODUCT ▶ Figures can be different from actual objects. Dust bin filter (spare) Brush for cleaning filter Mop plate (Sold separately.) Ultra microfiber mop (2 pieces) Dry cell for remote controller (2 AAA size) Quick guide Operation manual Remote controller Home station HOM-BOT OWNER...

7 PART DESCRIPTION – HOME STATION / DUST BIN ▶ Figures can be different from actual objects. Home station Dust bin Power lamp Charging terminal Reset button Sponge filter HEPA filter Dust bin handle Dust bin cover Suction port cover Dust bin cover release button Power cord groove

8 BUTTON FUNCTIONS – HOM-BOT • Use the TIMER button to activate the time delay feature. • The timer can be set from 1 to 12 hours. • The timer button only works when the HOM-BOT is attached to the home station. Always attach HOM-BOT to the home station when setting the timer function TIMER HOMING ST...

9 BUTTON FUNCTIONS – REMOTE CONTROL Cell by Cell cleaning The HOM-BOT will clean using the spatial expansion style. Zigzag cleaning Cleaning will be performed by the HOM-BOT in the zigzag traveling fashion. • The HOM-BOT’s power supply cannot be turned on with the remote control.• To turn on the pow...

10 DISPLAY STATUS INFORMATION • Use the remote control to change the cleaning mode. • Once the cleaning mode has been selected, it will be saved and automatically selected when the unit is turned on again, unit it is changed again. • To cancel the timer setting, press the STOP button on the remote c...

11 BEFORE YOU START Check these items before cleaning Loading the remote control battery 1. Open the battery cover by lifting the rear hook of the remote control.2. Insert two AAA batteries, checking for +, - nodes while loading.3. Close the battery cover completely so that the batteries will not fa...

12 OVERVIEW 1 2 3 4 5 Use of cleaning methods and auxiliary functions. (page 18~21) The cleaning method and auxiliary functions can be se- lected with the remote control. Install the home station. (page 13) Insert the power cord plug into an outlet and locate the station against a wall. If power is ...

13 HOW TO INSTALL THE HOME STATION 3ft 3ft 6ft 1. Position the home station against a wall on a hard level surface to prevent sliding during docking. Remove objects within 3ft to the right and left side and within 6ft to the front. 2. Plug the power cord into an outlet. Wrap the power cord around th...

14 HOW TO TURN THE HOM-BOT POWER SUPPLY ON & OFF To turn the power supply on, turn the HOM-BOT upside down on a smooth/soft surface and check whether the main power supply switch is turned on.If the main power supply switch is turned off, turn on the switch. ※ When turning on the power switch, d...

15 HOW TO START AND STOP CLEANING After the HOM-BOT is turned on, press the START/STOP button to begin cleaning. A melody will sound and cleaning will begin. Press the START/STOP button during the cleaning cycle to stop cleaning. ※ When the 'START/STOP' button is pressed while the power supply is tu...

16 HOW TO CHARGE THE BATTERY If using the HOM-BOT for the first time or to charge the battery by interrupting the cleaning, you can manually charge the battery. Method 1. Attach the HOM-BOT to the home station by matching up the two arrows on the HOM-BOT and the home sta- tion. A melody will sound a...

18 CLEANING MODES 수동 청소 Use the zigzag cleaning method when rapid cleaning is de- sired. When the "ZIGZAG" button on the remote control is pressed, zigzag cleaning will begin and the zigzag indicator light will come on. With spatial expansion cleaning, the cleaning will be per- formed by div...

19 㬅 㩅 㷡 AUXILIARY CLEANING MODES This method of cleaning involves manually moving the HOM-BOT by pressing the directional (arrow) buttons on the remote control.Hom-Bot will clean as it is being moved to the front, rear, or rotated to the left and right side according to the input of the directional...

20 TIMER CLEANING 2. Adjust the time as much as desired by mul- tiple presses of the TIMER button. Each time you press the button, the time will increase by one hour. - The start time can be set up to a maxi- mum of 12 hours and once set up, the time will be indicated by the status indica-tion lamps...

21 MOP CLEANING (Mop attachment sold separately) 1. Attach the ultra microfiber mop to the Velcro of the mop plate as shown in the figure. ※ To prevent the HOM-BOT from malfunction- ing, do not cover the attaching guide with the mop. 2. Accurately match up and insert the mop plate fixing hook on the...

22 CLEANING THE DUST BIN 1. Open the dust bin cover by pressing the PUSH button on the HOM-BOT. 2. Grab the handle of the dust bin and pull it upward. 3. Separate the HEPA filter and the inside sponge filter by removing the HEPA filter ※ To clean the dust bin filter, refer to page 23. 4. Lift the co...

23 CLEANING THE DUST BIN FILTER The dust bin filters are comprised of the HEPA filter and the sponge filter. Clean the HEPA filter and the sponge filter according to the following sequence: 1. Separate the HEPA filter and the inside sponge filter by removing the HEPA filter (as shown). 3. After wash...

24 CLEANING THE BRUSH Lay a smooth cloth on the floor. Turn the HOM-BOT over and put the HOM-BOT on the cloth. Turn off the power supply before cleaning. Grab the brush and remove by pulling it up. Insert the fixing hook on the op- posite side of the brush (marked with a rounded rectangle) by matchi...

25 Camera sensor CLEANING THE SENSOR/CHARGING TERMINAL Receiving sensor of remote controller • Do not clean the HOM-BOT by directly spraying it with water, thinner, benzene, etc.• Call the service center if the sensors or charging terminals are damaged. Sensor and terminal damage can cause the produ...

26 CLEANING THE SIDE BRUSH Foreign objects/materials such as hair can easily adhere to the side brush. Remove such materials at least once a week. If excessive amounts of foreign materials are stuck to the brush, there is a risk of damage to the brushes. If the floor is rough or wall skirtings are f...

28 TROUBLESHOOTING When the voice, “Please check the wheels”, is announced. If the unit becomes stuck or suspended and the wheels do not allow the unit move, the voice, “Please check the wheels”, will be announced. • Is a wheel trapped in the front door, balcony, stairway, etc? • Is any foreign mate...

31 Confirm before reporting the failure of HOM-BOT. BEFORE YOU CALL FOR SERVICE Problem Solutions (Reference page) This is not a failure. HOM-BOT has its own power saving function. If it is not used for ten minutes after the power supply is turned on, the power will automatically turn off. Check tha...

32 Item/model External dimension Weight Power consumption Battery (fully charged) Maximum Traveling Velocity Use time (1 time charging) Charging time Main functions LG HOM-BOT LRV5900 Φ 14.17 in X 3.54 in 7lb 18 W DC 16.8 V 13.8 in/sec Approx. 75 minutes Based on general floor surface 3 hours Obstac...

33 REFERENCE ITEMS Open source software notice The following GPL executables and LGPL libraries used in this product are subject to the GPL/LGPL License Agreements: GPL EXECUTABLES: Linux kernel 2.6, bash, busybox, gdb, mtd-utils, u-boot, module-init-tools, procps, wireless-tools LGPL LIBRARIES: gli...