LG A9NEOMAX - User Manual

09 • If a child places the product or battery into its mouth, it will cause electric shock or injury, or damage the product or battery. When using the product, remove any wire or string from the bottom of the Charging Station. • Straps or wires may wrap around the product and cause a product malfunc...

10 CauTiON Proper usage Do not apply impact to the product or drop it from a height. • It may damage the product and/or result in injury. Make sure that the product does not fall. • It may cause injury or damage the product. Make sure that the filter is installed in the product prior to each use. Do...

12 PaCkagE iNfORMaTiON Standing type 6 1 4 10 5 2 3 8 7 9 Wall-mount type 6 1 4 10 2 3 9 1 Product body 2 Extension pipe 3 Multi-surface Power Drive Nozzle® 4 Charging station 5 Charging station pipe 6 Combination tool and crevice tool holder 7 Detachable stand for nozzle and mop pads 8 Charging sta...

13 accessories • Parts and accessories may vary depending on the model that you have purchased. Product body Extension pipe Multi-surface Power Drive Nozzle® Charging station Adaptor 1) Battery Crevice Tool Combination Tool Wall Anchoring Block Double-sided tape (2) 1) Screw Anchor (2) Anchoring scr...

14 iNSTallaTiON installing the floor standing charging station 1 Place the charging station support on the floor and assemble the charging station pipe, the Detachable stand for nozzle and mop pads and the charging station in this order. Click Detachable stand for mop pads Detachable stand for nozzl...

15 CauTiON • Avoid dropping the product and parts when taking them out of the package. It may damage the product and/or cause personal injury. • Do not use double-sided tape to anchor the charging station on papered walls. Please use the provided screws as otherwise the wall paper will get torn by m...

17 Note about using the product Points to be aware of when using the product using the Product 1 Assemble the body, extension pipe, inlet port, and battery in that order. Inlet port Extension pipe Battery Product body 2 Press the button on the extension pipe to adjust its length. • The pipe has 4 ex...

18 2 Insert the battery into the auxiliary charging station. Charging indicator of the auxiliary battery Please note • Make sure that the power adapter is connected to both the charging station and the power outlet • If the main battery is charging on the charging station, the auxiliary battery will...

1 2 1 Power On/Off button • Press the power On/Off button to activate the Mopping only mode. 2 Mode button • Press "+" once to activate the Normal mode. • Press "+" one more to activate the Power mode. • Press and hold "+" for more than 3 seconds to activate the Turbo mode. •...

Combination Tool This accessory is helpful for cleaning corners or small gaps. basic For cleaning flat surfaces such as a sofa or mattress. brush type For cleaning delicate surfaces such as a frame or furniture. Button CauTiON • Prolonged use of the product with an accessory tool attached may over h...

flexible Hose Extension Since its length can be adjusted, it is connected with the inlet port and used to clean out of reach places. * The flexible hose extension is provided only for an applicable model. Please note • When the flexible hose extension is used, the Multi- surface Power Drive Nozzle®,...

3 Align the center of the mop pad with the center of the mop attachment plate, and have the striped side of the mop face up. • Fitting the mop plate upside down or failure to attach the mop pad to the attachment plate properly may compromise the cleaning performance. • Attaching the mop pad in a dry...

MaiNTENaNCE Cleaning the the Dustbin 1 Remove the battery from the unit before cleaning the dustbin. 2 Please empty the dustbin next to a wastebasket or where dust and foreign objects can be emptied easily. 3 Press the dustbin button downward to open it. • Empty the bin. • Be careful as dust/foreign...

Cleaning the Hard floor Power Drive Nozzle®/Multi-surface Power Drive Nozzle® Please clean the Hard Floor Power Drive Nozzle® and Multi-surface Power Drive Nozzle® as follows: 1 Remove the nozzle from the product. 2 Turn the nozzle upside down and turn the rotating brush removal screw counterclockwi...

Cleaning of the Mop Nozzle Clean the mop nozzle as below. 1 Separate the nozzle from the product and turn the nozzle over. 2 Remove the remaining foreign objects using a wet wipe or a tissue. ※ Foreign matter remaining on the nozzle may result in a bad smell. WaRNiNg • Make sure to separate the nozz...

POiNTS TO CHECk bEfORE CONTaCTiNg CuSTOMER SERviCE. Please check once again if one of the following symptoms is present while using the product. The product may not be malfunctioning. Symptom Cause Solution The product does not operate. is the battery fully discharged? • Charge the battery. is the p...