LG A9MASTER2X - User Manual

09 • If a child places the product or battery into its mouth, it will cause electric shock or injury, or damage the product or battery. When using the product, remove any wire or string from the bottom of the Charging Station. • Straps or wires may wrap around the product and cause a product malfunc...

10 CauTiON Proper usage Do not apply impact to the product or drop it from a height. • It may damage the product and/or result in injury. Make sure that the product does not fall. • It may cause injury or damage the product. Make sure that the filter is installed in the product prior to each use. Do...

12 PaCkagE iNfORMaTiON Standing type 6 1 4 10 5 2 3 8 7 9 Wall-mount type 6 1 4 10 2 3 9 1 Product body 2 Extension pipe 3 Multi-surface Power Drive Nozzle® 4 Charging station 5 Charging station pipe 6 Combination tool and crevice tool holder 7 Detachable stand for nozzle and mop pads 8 Charging sta...

13 accessories • Parts and accessories may vary depending on the model that you have purchased. Product body Extension pipe Multi-surface Power Drive Nozzle® Charging station Adaptor 1) Battery Crevice Tool Combination Tool Wall Anchoring Block Double-sided tape (2) 1) Screw Anchor (2) Anchoring scr...

14 iNSTallaTiON installing the floor standing charging station 1 Place the charging station support on the floor and assemble the charging station pipe, the Detachable stand for nozzle and mop pads and the charging station in this order. Click Detachable stand for mop pads Detachable stand for nozzl...

15 CauTiON • Avoid dropping the product and parts when taking them out of the package. It may damage the product and/or cause personal injury. • Do not use double-sided tape to anchor the charging station on papered walls. Please use the provided screws as otherwise the wall paper will get torn by m...

17 Note about using the product Points to be aware of when using the product • Make sure that the dustbin lid is on prior to using the product. Otherwise, the suction strength will deteriorate and cleaning will not be satisfactory. • Support the bottom of the product when cleaning an elevated surfac...

18 2 Insert the battery into the auxiliary charging station. Charging indicator of the auxiliary battery Please note • Make sure that the power adapter is connected to both the charging station and the power outlet • If the main battery is charging on the charging station, the auxiliary battery will...

19 using the nozzles • Please note that the following applies to the corresponding models: • The nozzle can be attached to the product body or extension pipe. • Use a different mode if the inlet gets stuck on the floor, carpet or bed sheets or if you need a more powerful mode. CauTiON • Do not use t...

20 Hard Dirt Tool It is firm bristles for removing dirt from hard surfaces. Mattress Tool It is for mattresses and soft furnishing. flexible Crevice Tool Since its length can be adjusted and it can be bent, it is used for cleaning dust inside the vehicle or narrow spaces in furniture where bending i...

21 Mop Nozzle It is suitable for cleaning dust and mop cleaning at the same time. Please note The mop pads will only rotate at one speed regardless of what power setting the Vacuum is set to. for mop cleaning How to fill the water 1 Press the PUSH button to separate the mop nozzle and the water tank...

23 MaiNTENaNCE Cleaning the the Dustbin 1 Remove the battery from the unit before cleaning the dustbin. 2 Please empty the dustbin next to a wastebasket or where dust and foreign objects can be emptied easily. 3 Press the dustbin button downward to open it. • Empty the bin. • Be careful as dust/fore...

25 Cleaning the Hard floor Power Drive Nozzle®/Multi-surface Power Drive Nozzle® Please clean the Hard Floor Power Drive Nozzle® and Multi-surface Power Drive Nozzle® as follows: 1 Remove the nozzle from the product. 2 Turn the nozzle upside down and turn the rotating brush removal screw countercloc...

26 Cleaning of the Mop Nozzle Clean the mop nozzle as below. 1 Separate the nozzle from the product and turn the nozzle over. 2 Attach the crevice tool to the main body of the vacuum to remove any foreign objects from its base. 3 Remove the remaining foreign objects using a wet wipe or a tissue. ※ F...

27 POiNTS TO CHECk bEfORE CONTaCTiNg CuSTOMER SERviCE. Please check once again if one of the following symptoms is present while using the product. The product may not be malfunctioning. Symptom Cause Solution The product does not operate. is the battery fully discharged? • Charge the battery. is th...