Horizon Fitness GS1050T - Manual

7 ASSEMBLY STEP 2 A Pull LEAD WirE through riGHT ConSoLE MAST. After pulling the lead wire through the mast, the top of the ConSoLE CAbLES should be located at the top of the mast. Detach and discard LEAD WirE. B Open HArDWArE bAG 2. C Move riGHT LinKAGE ArM into position and attach to ELEvATion frA...

8 ASSEMBLY STEP 3 SPRING WASHER (B)15 mmQty: 4 FLAT WASHER (H)20 mmQty: 4 BOLT (G)15 mmQty: 4 HArDWArE bAG 3 CONTENTS : CONSOLE CABLES CONSOLE MAST CONSOLE SPRING WASHERS (B) BOLTS (G) FLAT WASHERS (H) DO NOT ATTACH THIS SIDE UNTIL STEP 3-D A Disengage the deck lock latch with your foot to lower the...

9 ASSEMBLY STEP 4 BOLT (I)15 mmQty: 4 HArDWArE bAG 4 CONTENTS : CONSOLE CONSOLE MAST BOLTS (I) SUPPORT BAR A Open hardware bag 4 . B Align support bar with holes in console masts . C Insert bolts (i) into all 4 holes of the support bar . NOTE: Look into holes in the right mast before inserting bolts...

10 ASSEMBLY STEP 5 BOLT (G)15 mmQty: 2 FLAT WASHER (J)15 mmQty: 2 BOLT (K)12 mmQty: 2 HArDWArE bAG 5 CONTENTS : CONSOLE CONSOLE MAST BOLTS (G) FLAT WASHERS (J) BOLTS (K) HANDLEBAR HANDLERBAR BOOT A Open HArDWArE bAG 5. B Slide left HAnDLEbAr to ConSoLE and attach using 1 boLT (K). C Slide HAnDLEbAr ...

11 TREADMILL OPERATION This section explains how to use your treadmill’s console and programming. The BASIC OPERATION section in the TREADMILL GUIDE has instructions for the following: • LoCATion of THE TrEADMiLL • USinG THE SAfETy KEy • foLDinG THE TrEADMiLL • MovinG THE TrEADMiLL • LEvELinG THE Tr...

13 ConSoLE oPErATion Note: There is a thin protective sheet of clear plastic on the overlay of the console that should be removed before use. A) DiSPLAy WinDoWS: time, distance, calories, heart rate, speed and incline.b) ALPHAnUMEriC DiSPLAy: displays goal and program information. C) SELECT TArGET: ...

14 DiSPLAy WinDoWS • TiME: Shown as minutes : seconds. View the time remaining or the time elapsed in your workout. • DiSTAnCE: Shown as miles. Indicates distance traveled or distance remaining during your workout. • inCLinE: Shown as percent. Indicates the incline of your walking or running surface...

15 GETTinG STArTED 1) Check to make sure no objects are placed on the belt that will hinder the movement of the treadmill. 2) Plug in the power cord and turn the treadmill ON. 3) Stand on the side rails of the treadmill. 4) Attach the safety key clip to part of your clothing making sure that it is s...

18 GoAL CEnTEr™ Research shows that those who create and track their fitness goals, on average, achieve greater success than those who do not. Because your new treadmill is equipped with Horizon’s exclusive GOAL CENTER ™ Performance Tracker, you’ve taken an important step towards achieving your fitn...

19 To rESET THE ConSoLE Hold STOP key for 3 seconds. CooL DoWn Puts treadmill into cool down mode. Cool down lasts for four minutes and reduces speed and incline to allow your heart to readjust to decreased demand. finiSHinG yoUr WorKoUT When your workout is complete, the monitor display will flash ...

22 WEiGHT CAPACiTy = 325 lbs (147 kilograms) frAME • LIFETIMEHorizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the original owner, so long as the device remains in the possession of the original owner. (The frame is defined as the welded metal base o...