Heath Zenith 5797 - Manual

Heath Zenith 5797

Heath Zenith 5797 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 2 – INSTALLATION; NOTE: If fixture is mounted higher; Mode Switching Summary; MANUAL MODE; Timer
  • Page 3 – Mount the Light Control; caulk the; Wire the Light Control; WARNING: Turn power off at circuit breaker; Bulb Installation; White to White
  • Page 4 – Bottom of Sensor; Maximum Range; TEST AND ADJUSTMENT
  • Page 5 – SPECIFICATIONS; TROUBLESHOOTING GUIDE
  • Page 6 – TEN YEAR LIMITED WARRANTY; TECHNICAL SERvICE; No Service Parts Available for this Product
  • Page 7 – FUNCIONAMIENTO; FASE DE LÁMPARA
  • Page 8 – NOTA: Si el aparato está instalado a; INSTALACION; CUIDADO: Para evitar los peligros de incendio; Resumen de las modalidades del interruptor; PRUEBA; Luz de Adorno; Fases de Lámpara; NORMAL – La luz se prende instantáneamente.
  • Page 9 – Instale el Control de Luz; calafatee la superficie de montaje de; Conecte el Control de Luz; ADvERTENCIA: Desconecte la energía en el; Instalación de Bombilla; Blanco a Blanco
  • Page 10 – Parte de abajo del detector; Alcance Máximo; PRUEBA Y AJUSTE
  • Page 11 – ESPECIFICACIONES; GUIA DE INvESTIGACION DE AvERIAS
  • Page 12 – GARANTÍA LIMITADA A 10 AÑOS; SERvICIO TÉCNICO; de devolver el producto a la tienda.
  • Page 13 – Caractéristiques; FONCTIONNEMENT; à détecteur; Exigences
  • Page 14 – AvERTISSEMENT: Pour éviter les risques de; Résumé du mode de commutation; Modes D’Éclairage; NORMAL – L’éclairage s’allume instantanément.
  • Page 15 – MISE EN GARDE : Coupez l’alimentation au; Installation de L’ampoule
  • Page 16 – Bas du détecteur; Portée maximale; ESSAIS ET RÉGLAGES
  • Page 17 – FICHE TECHNIQUE; GUIDE DE DÉPANNAGE
  • Page 18 – GARANTIE LIMITÉE DE 10 ANS; SERvICE TECHNIQUE; avant de retourner l’article au magasin.
Loading the manual

© 2007 HeathCo LLC

598-1315-02

Features

• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Three lamp modes available: Normal, Soft, or Flash.
• D

ual

B

rite

®

Timer.

• Photocell keeps the lighting off during daylight

hours.

• LED indicates motion was sensed (day or night).

Requirements

• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be

wired through a switch.

•

Some codes require installation by a qualified
electrician.

• This product is intended for use with the enclosed

gasket and with a junction box marked for use in wet
locations.

2 Wire

Connectors

Gasket

6 Mounting

Screws (3 sizes)

Mounting Bolt

Mounting Strap

Rubber Plug

OPERATION

* resets to Auto Mode at dawn.

TEST

ON-TIME

TEST

1 5 20

AUTO

Note: When first turned on wait about 1

1

/

2

minutes for

the circuitry to calibrate.

Light Shield

Plastic Hanger

This package includes:

Put the ON-TIME switch in the 1, 5,
or 20 minute position.

Mode:

On-Time:

Works:

Day

Night

Test

5 Sec

x

x

Normal

1, 5, 20 min.

x

Manual

Until Dawn*

x

Accent

3, 6 Hr. to Dawn

x

LAMP MODE

NORMAL SOFT FLASH

LAMP MODE

Put the LAMP MODE switch
in the Normal, Soft, or Flash
position.

TEST 1 5 20

ON-TIME

Off 3 6 Dusk to

Dawn

D

ual

B

rite

®

Put ON-TIME switch
on the sensor bottom
to TEST and the D

ual

-

B

rite

®

switch OFF.

Light Control

Sensor

Cover Plate

2 Halogen Bulbs

(Installed)

Model 5797

D

ual

B

rite

®

Motion

Sensor Light Control

Meets the ENERGY STAR

®

guidelines

when D

ual

B

rite

®

function is off and

ON-TIME is 1 or 5 minutes.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - INSTALLATION; NOTE: If fixture is mounted higher; Mode Switching Summary; MANUAL MODE; Timer

2 598-1315-02 INSTALLATION For easy installation, select an existing light operated by a wall switch for replacement.For best performance, mount the fixture about 8 ft. (2.4 m) above the ground. NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sensor down will reduce coverage distan...

Page 3 - Mount the Light Control; caulk the; Wire the Light Control; WARNING: Turn power off at circuit breaker; Bulb Installation; White to White

3 598-1315-02 Mount the Light Control ❒ Place the mounting bolt through the front of the junction box cover. Push the small gasket hole over the mounting screw. ❒ Make sure the wire connectors and wires are inside the junction box. Align the mounting screw with the center hole in the mounting strap....

Page 4 - Bottom of Sensor; Maximum Range; TEST AND ADJUSTMENT

4 598-1315-02 Motion Motion NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sensor down will reduce coverage distance.The detector is less sensitive to motion directly towards it. Least Sensitive Most Sensitive Sensor ❒ Loosen the clamp screw in the sensor ball joint and gently rot...

Other Heath Zenith Models

All Heath Zenith Other