Heath Zenith 5718 - Manual
Heath Zenith 5718 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – INSTALLATION; NOTE: If fixture is mounted higher than; Wall Mount; Move ON-TIME Switch to; Mode Switching Summary; Flip light switch off; MANUAL MODE; Timer
- Page 3 – Wire the Light Control; White to White; Mount the Light Control; Twist the junction box wires and fixture wires together
- Page 4 – Bottom of Sensor; Least Sensitive; TEST AND ADJUSTMENT
- Page 5 – SPECIFICATIONS; OR; TROUBLESHOOTING GUIDE
- Page 6 – TEN YEAR LIMITED WARRANTY; TECHNICAL SERvICE; If the problem persists, call* for assistance at; No Service Parts Available for this Product
- Page 7 – FUNCIONAMIENTO; Requisitos; Características; Nota: Cuando lo prenda por primera vez espere 1; FASE DE LÁMPARA
- Page 8 – INSTALACION; NOTA: Si el aparato está instalado a; Montaje en pared; Mueva el interruptor de; Resumen de las modalidades del interruptor; PRUEBA; Luz de Adorno; Fases de Lámpara; NORMAL – La luz se prende instantáneamente.
- Page 9 – Conecte el Control de Luz; Blanco a Blanco; Instale el Control de Luz; ADvERTENCIA: Desconecte la energía en el
- Page 10 – Parte de abajo del detector; Lo menos sensible; PRUEBA Y AJUSTE
- Page 11 – y MODO MANUAL; atardecer al amanecer
- Page 12 – GARANTÍA LIMITADA A 10 AÑOS; SERvICIO TÉCNICO; de devolver el producto a la tienda.
- Page 13 – à détecteur; Caractéristiques; FONCTIONNEMENT; Exigences
- Page 14 – Montage mural; les commandes; PRIORITÉ MANUELLE; Résumé du mode de commutation; Modes D’Éclairage; NORMAL – L’éclairage s’allume instantanément.
- Page 16 – Le moins sensible; Bas du détecteur; Portée maximale; ESSAIS ET RÉGLAGES
- Page 17 – FICHE TECHNIQUE; OU; GUIDE DE DÉPANNAGE; manuelle; aurore
- Page 18 – GARANTIE LIMITÉE DE 10 ANS; SERvICE TECHNIQUE; avant de retourner l’article au magasin.
Model 5718
D
ual
B
rite
®
Motion
Sensor Light Control
© 2007 HeathCo LLC
598-1308-02
TEST
2 Shells
Features
• Turns on lighting when motion is detected.
• Automatically turns lighting off.
• Three lamp modes available: Normal, Soft, or Flash.
• D
ual
B
rite
®
Timer.
• Photocell keeps the lighting off during daylight hours.
• LED indicates motion was sensed (day or night).
TEST 1 5 20
ON-TIME
Off 3 6 Dusk to
Dawn
D
ual
B
rite
®
Put ON-TIME switch
on the sensor bottom
to TEST and the D
ual
-
B
rite
®
switch OFF.
OPERATION
* resets to Auto Mode at dawn.
ON-TIME
TEST
1 5 20
AUTO
Note: When first turned on wait about 1
1
/
2
minutes for
the circuitry to calibrate.
This package includes:
Light Control
Sensor
Cover
Plate
Lamp
Holders
Plastic Hanger
Rubber Plug
Gasket
6 Screws
(3 sizes included)
Mounting Strap
Mounting Bolt
2 Wire
Connectors
Requirements
• The light control requires 120-volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
•
S o m e c o d e s r e q u i r e i n s t a l l a t i o n b y a
qualified electrician.
• This product is intended for use with the enclosed
gasket and with a junction box marked for use in wet
locations.
Mode:
On-Time:
Works:
Day
Night
Test
5 Sec
x
x
Normal
1, 5, 20 min.
x
Manual
Until Dawn*
x
Accent
3, 6 Hr. to Dawn
x
LAMP MODE
NORMAL SOFT FLASH
LAMP MODE
Put the LAMP MODE switch
in the Normal, Soft, or Flash
position.
Put the ON-TIME switch in the
1, 5, or 20 minute position.
Meets the ENERGY STAR
®
guidelines
when D
ual
B
rite
®
function is off and
ON-TIME is 1 or 5 minutes and when
used with 120 W Max bulbs.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 598-1308-02 ON-TI ME RANGE DU AL BRITE™ MIN MA X TE ST 1 5 20 M INUTES OFF 3 6 DU SK TO H OUR DAW N LAMP MOD E NORMAL SOFT FLAS H INSTALLATION For easy installation, select an existing light with a wall switch for replacement.For best performance, mount the fixture about 8 ft. (2.4 m) above the gr...
3 598-1308-02 Wire the Light Control White to White Black to Black Junction box ground wire to green ground screw on fixture. Gasket Mounting Strap Mounting Bolt Rubber Plug Mount the Light Control ❒ Align the light control cover plate and cover plate gasket. Secure with the mounting bolt. ❒ Align t...
4 598-1308-02 Motion Motion NOTE: If fixture is mounted higher than 8 ft. (2.4 m), aiming the sensor down will reduce coverage distance.The detector is less sensitive to motion directly towards it. ❒ Loosen the clamp screw in the sensor ball joint and gently rotate the sensor. ❒ Walk through the cov...
