Franke FFP 1000 - Manual
Franke FFP 1000 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – Faucet installation; Please remove all components from package and inspect prior to
- Page 4 – - round flat fiber washer; solid surface installation: The sub-countertop mounting surface; Remove all mounting hardware from protecting plastic bag.; body. DO NOT use putty or other sealant at this location
- Page 5 – lace the dowels in the holes.
- Page 6 – Standard maintenance and trouble shooting; Cleaning of the spray head
- Page 7 – Replacing the Headvalve; Clean aerator periodically.
- Page 8 – Limited lifetime warranty
FFP 1000 SERIES
Swivelling spout faucet with spray head
Installation guide
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 ENGLISH Faucet installation Please remove all components from package and inspect prior to installation (see itemized table and picture). NOTE: Call us immediately if you see inconsistencies. (1-800-626-5771) or visit www.frankeksd.com TABLE OF CONTENTS 1 Faucet 2 Wall fastening set 3 Wall flange ...
4 ENGLISH 4. Install the mounting hardware (G R0338031) to the threaded shank in the following sequence: 1 - round flat fiber washer 2 - triangular shaped plastic support 3 - flat metal washer 4 - thread brass nut 5. Assure that the handle and spout are properly aligned in forward position 6. Tighte...
5 ENGLISH 8. Flush out debris from water lines and faucet. 1. Pull spray hose out of the faucet spout and point the open end towards the sink drain. 2. Open faucet handle - cold side first - by turning handle to the right and mov - ing it upward. 3. Let the faucet run on cold for 15 to 30 seconds. 4...
