Fanimation WR500WH - User Manual

Fanimation WR500WH

Fanimation WR500WH Remote Control – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
Page: / 2
Loading the manual

How to Wire and Operate Your Wall Control

WR500WH Wall Control

DESCRIPTION:

3-speed ceiling fan control with canopy receiver.

ELECTRICAL SPECS:

120V, 60Hz Ceiling Fan

FAN MODELS USED:

most Fanimation fans - see catalog or visit our website, fanimation.com for
more information

SPECIFICATION and INSTRUCTION SHEET

NOTE:

If fan or supply wires are different colors than

indicated, have this unit installed by a qualified electrician.

1.

If fan is controlled by a pull chain, fan must be set
to high.

2.

Install Receiver in the Hanger Bracket:

• Connect wires using connectors as shown in Figur

e 1.

• Position all connected wires and receiver antenna to

allow installation of ceiling canopy. (Figure 2)

• Using canopy screws threaded into the hanger bracket

reinstall ceiling canopy.

• Restore electrical power

3.

Dip Switch Set Up

(Figure 3)

WARNING

To avoid possible electrical shock, be sure electricity is

Figure 2

Figure 3

Figure 1

AC120V 60HZ

INPUT

WHITE (AC IN N)

BLACK (AC IN L)

BLACK (AC IN L)

BLACK

BLACK

BLACK (TO MOTOR L)

BLACK (AC IN L)

BLACK

WHITE

BLACK(TO MOTOR L)

WHITE(TO MOTOR N)

BLACK

(ANTENNA)

WHITE

(AC IN N)

BLACK
(AC IN L)

BLACK

(TO MOTOR L)

WHITE

(TO MOTOR N)

NOTE:

The remote unit has 32 different code

combinations. To prevent possible interference from or
to other remote units, simply change the combination
code in the remote and receiver.

NOTE: Factory setting is all up. Do not use this position.

• To set the code on receiver unit, slide dip switches to

the same positions as set on the remote.

• To set the remote code with a small screwdriver or

ball point pen (neither included), slide dip switches

firmly up or down to same as receiver unit.

Dip Switch

Dip Switch

GROUND WIRE

GREEN / YELLOW

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Fanimation Remote Controls Models

All Fanimation Remote Controls