Fanimation WC3WH - User Manual

Fanimation WC3WH

Fanimation WC3WH Remote Control – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
Page: / 3
Loading the manual

WARNING

To avoid possible electrical shock, be sure electricity is
turned off at the main fuse box before wiring.

WARNING

To avoid possible fire or shock, make sure that the
electrical wires are completely inside the outlet box and
not pinched between the wall plate and the wall.

WARNING

Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not operate
fan unless blades are in place. Noise and fan damage
could result.

1.

Connect wires using connectors as shown in

Figure 1. Make wire connections and secure with wire
nuts supplied.
• Connect the Black wire from the wall-mounted
control with the wire from the wire of A. C. power
supply.
• Connect the Black wire from the wall-mounted
control with the Black wire from the ceiling fan.
• Connect the Blue wire from the wall-mounted
control with the Blue wire from the ceiling fan.
• Connect the Orange wire from the wall-mounted
control with the Orange wire from the ceiling fan.
• Connect the green/yellow wire from the ceiling
fan with the ground wire.

2.

Attach wall control unit to outlet box using the two

screws provided. Then, attach face plate to the wall
control. (Figure 2)
• Restore electrical power.

3.

Set the fan speed and light of pull chain fans to

high with the pull chain before using the wall control.

4.

Operating Wall Control: (Figure 3)

- Indicator LED light
- Fan off
- Fan speed control: Turns on fan and turns
speed up or down.
- Up Light: Turns light ON/OFF.

- Down Light: Turns light ON/OFF.

- Light Dimmer: Up or down to brighten or
dim light.
- Pull out to turn all power off.

NOTE: If fan or supply wires are different colors than indicated, have this unit installed by a qualified electrician.

Figure 1

Figure 2

Figure 3

WC3WH Wall Control

SPECIFICATION and INSTRUCTION SHEET

DESCRIPTION:

Single 3-speed ceiling fan control with light up/down dimmer switch

ELECTRICAL SPECS:

120V, 60Hz Ceiling Fan

FAN MODELS USED:

most Fanimation fans - see catalog or visit our website, fanimation.com for

more information

How to Wire and Operate Your Wall Control

Copyright 2020 Fanimation

2020/12 V.01

10983 Bennett Parkway

Zionsville, IN 46077

(888) 567-2055 • FAX (866) 482-5215

Outside U.S. call (317) 733-4113

WWW.FANIMATION.COM

NOTE: Supply wires and fan wires
omitted for clarity.

Face Plate

Screw

Outlet Box

YELLOW & GREEN

BLUE

BLACK

GROUND

TO MOTOR L

FOR LIGHT DOWN

YELLOW & GREEN

BLUE

BLACK

ORANGE

FOR LIGHT UP

ORANGE

BLACK

AC IN L

AC IN N

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Other Fanimation Remote Controls Models

All Fanimation Remote Controls