Electrolux 316469105 Manual - Free PDF Download

Page 2 - Anchor

Page 3 - INSTALLATION INSTRUCTIONS FOR FREESTANDING GAS RANGE; DO NOT

INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER.IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE.READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Clearances and Dimensions 1. Location—Check location where the range will beinstalled. Check for proper electrical and gas s...

Page 4 - IMPORTANT SAFETY INSTRUCTIONS

Important Notes to the Installer 1. Read all instructions contained in these installationinstructions before installing range. 2. Remove all packing material from the oven compartmentsbefore connecting the gas and electrical supply to therange. 3. Observe all governing codes and ordinances. 4. Be su...

Page 5 - Before Starting; Tools You Will Need; For gas supply connection:; Additional Materials You Will Need; Normal Installation Steps; A. Locate the Bracket Using the Template

Before Starting Tools You Will Need For leveling legs and Anti-Tip Bracket: • Adjustable wrench or channel lock pliers • 5/16" Nutdriver or Flat Head Screw Driver • Electric Drill & 1/8" Diameter Drill Bit (5/32" Masonry DrillBit if installing in concrete) For gas supply connection: ...

Page 6 - Connect the appliance to the gas supply.

C. Level & Position Appliance - Level appliance by adjusting the (4) leveling legs with a wrench. NOTE: A minimumclearance of 1/8" is required between the bottom of theappliance and the leveling leg to allow room for thebracket. Use a spirit level to check your adjustments.Slide appliance ba...

Page 7 - “ ON ”

5. Read these electrical connection details firstthen connect electricity to appliance. Before servicing, disconnect electrical supply at circuit breaker, fuse or power cord. Electric Requirements: A dedicated, properly grounded and polarized branch circuit protected by a 15 amp. circuit breakeror t...

Page 8 - PLEASE READ CAREFULLY!; Grounding Instructions; Burner sizes and cooktop locations; Front of cooktop

6. Assembly of the Surface Burner Heads, BurnerCaps and Burner Grates: It is very important to make sure that all of the Surface BurnerHeads, Surface Burner Caps and Surface Burner Grates areinstalled correctly. Your appliance was shipped with the burner heads and burnercaps assembled in the correct...

Page 9 - Electric Ignition Surface Burners

Operation of Oven Burners & OvenAdjustments 9. Electric Ignition Burners Operation of electric igniters should be checked after range andsupply line connectors have been carefully checked for leaks andrange has been connected to electric power. The oven burner is equipped with an electric contro...

Page 10 - Before You Call for Service; Model & Serial Number Location

Before You Call for Service Read the "Before You Call" and operating instruction sections inyour Use & Care Manual. It may save you time and expense. Thelist includes common occurrences that are not the result ofdefective workmanship or materials in this appliance. Refer to your Use &...