Electrolux EHG 672 Manual - Free PDF Download

Page 2 - Important Safety Information

3 Important Safety Information You MUST read these warnings carefully before installing or using the hob.If you need assistance, contact our Customer Care Departmenton 01635 522799 Installation ● This hob must be installed by qualified personnel,according to the manufacturer’s instructions and tothe...

Page 3 - For the User; Contents; For the Installer

4 For the User Descriptionof the Hob Page 5 Operation Page 6 Maintenanceand Cleaning Page 7 Something NotWorking? Page 8 Service andSpare Parts Page 8 Guarantee Conditions Page 9 Electrolux Service ForceCentre Addresses Page 10 This appliance is manufactured accordingto the following EEC directives:...

Page 4 - Description of the Hob

5 1. Hob Top2. Rapid Burner3. Semi-rapid Burners4. Auxiliary Burner5. Control knob for back right burner (semi-rapid)6. Control knob for back left burner (semi-rapid)7. Control knob for front left burner (rapid)8. Control knob for front right burner (auxiliary)9. Electric Ignition Push Button Descri...

Page 5 - Operation

6 HOB BURNERS To light a burner, turn the relevant control knobanticlockwise to maximum position. At the same timepush the electric ignition button which is marked witha little spark.. Then adjust the flame as required.If the burner does not ignite, turn the control knob tozero, and try again. When ...

Page 6 - Maintenance and Cleaning

7 Before any maintenance or cleaning can becarried out, you must DISCONNECT thehob from the electricity supply. The hob is best cleaned whilst it is still warm, asspillage can be removed more easily than if it is leftto cool. The Hob Top Regularly wipe over the hob top using a soft clothwell wrung o...

Page 7 - Something Not Working?; Service and Spare Parts

8 Something Not Working? If the hob is not working correctly, please carry out the following checks before contacting your localElectrolux Service Force Centre. SYMPTOM ■ There is no spark when lighting the gas ■ The gas ring burns unevenly SOLUTION ◆ Check that the unit is plugged in and the electr...

Page 8 - Guarantee Conditions

9 Guarantee Conditions ELECTROLUX STANDARD GUARANTEECONDITIONS We, Electrolux, undertake that if, within 12 monthsof the date of the purchase, this Electrolux applianceor any part thereof is proved to be defective by anyreason only of faulty workmanship or materials, wewill, at our option, repair or...

Page 9 - ELECTROLUX SERVICE FORCE

10 CHANNEL ISLANDS GUERNSEY Guernsey ElectricityPO Box 4Vale , Guernsey Channel Islands JERSEY Jersey ElectricityCompanyPO Box 45Queens RoadSt HelierJerseyChannel Islands JE4 8NY SCOTLAND ABERDEEN 8 Cornhill Arcade (M05) Cornhill DriveAberdeenAB2 5UT AUCHTERMUCHY 33A Burnside (M03) AuchtermuchyFifeK...

Page 11 - Instructions for the Installer; Engineer technical data

12 Ignition HT Spark Spark Generator Ispra Control's BF 50046 - 230-240V 0.6 YA T 120 Spark Gap Fixed OVERALL DIMENSIONS Width: 580 mm. Depth: 500 mm. Height: 88 mm. Weight: 8 Kg. Burner Dia. Tap By-pass Tap colour 1/100 mm Auxiliary 28 Yellow/Red Semi-rapid 32 Green/Black Rapid 40 Violet/Black Aera...

Page 12 - Important safety requirements; Location

13 Important safety requirements This hob must be installed in accordance with the GasSafety (Installation and Use) Regulations (CurrentEdition) and the IEE Wiring Regulations (CurrentEdition).Detailed recommendations are contained in thefollowing British Standards Codes Of Practice: B.S.6172/ B.S. ...

Page 13 - Gas Connection; Installation; Cut Out Size

14 550 470 580 500 55 min. FO 2109 Rectangular cut-out size for hob A) End of shaft with nutB) WasherC) Elbow It is important to install the elbow correctly,with the shoulder on the end of the thread,fitted to the hob connecting pipe.Failure to ensure the correct assembly willcause leakage of gas. F...

Page 14 - Building In; Fitting the hob to the worktop; Building over a cupboard or drawer

15 Building In a) Sealing gasket Fitting the hob to the worktop Before fitting the hob into the cut out, an adhesivesealing gasket supplied with the hob must be fitted tothe edge of the cut out. It is essential that no gaps areleft in this seal in order to prevent spillage near thehob seeping into t...

Page 15 - Electrical connections

16 Electrical connections Any electrical work required to install thishob should be carried out by a qualifiedelectrician or competent person, inaccordance with the current regulations. THIS HOB MUST BE EARTHED. The manufacturer declines any liabilityshould these safety measures not beobserved. This...

Page 16 - Wiring diagram

17 B L N 0 1 2 3 4 220/240 A Wiring diagram A. IGNITOR SWITCH B. IGNITOR UNIT

Page 17 - Fault Finding; Preliminary Electrical Systems Check

18 Fault Finding Preliminary Electrical Systems Check A. EARTH CONTINUITY CHECK -Appliance must be electricallydisconnected - meter set on Ω (Ohms) x 1 scale and adjust zero if necessary. a) Test leads from any appliance earth point to earth pin on plug. Resistance shouldbe less than 0.1 Ω (Ohm), ch...

Page 18 - Ignition System / Gas Ignition

19 Ignition System / Gas Ignition YES Check plug top fuse andreplace if necessary Check polarity and earthcontinuity of supply point Check earth continuityof appliance Ignitor does not spark Check fitting of burners Check position of theelectrode Check by pass simmeradjusted Light burner manually Ch...

Page 19 - Commissioning

20 Commissioning When the hob has been fully installed it will benecessary to check the minimum flame setting. To dothis, follow the procedure below. - Turn the gas tap to the MAX position and ignite. - Set the gas tap to the MIN flame position then turnthe control knob from MIN to MAX several times...

Page 20 - Servicing; Conversion from Natural Gas to LPG

21 Servicing A: Removal Of Hob Top 1. Remove all control knobs, pan supports, burner caps and crowns. 2. Remove 2 screws from each burner.3. Lift the hob top at the rear and disengage it from the front locators. 4. Remove fixing nut from generator and earth lead to hob. 5. Reassemble in reverse orde...