Crimestopper SP-300 - Manual

Crimestopper SP-300

Crimestopper SP-300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
Page: / 16

Table of Contents:

  • Page 2 – TABLE OF CONTENTS; LED and Valet Programming Button..............................................................................................3; Data Port Diagram ....................................................................................................................16; INSTALLATION CAUTIONS & WARNINGS; WE RECOMMEND; before jump starting, using a battery; DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED; with brake, and gas pedals, steering
  • Page 3 – CONTROL MODULE & COMPONENT MOUNTING; The
  • Page 4 – WIRING; YELLOW WIRE: IGNITION SWITCHED “ON” AND “START” +12 VOLTS
  • Page 5 – Connect to RED siren wire from the Siren in the engine compartment.; OUTPUT
  • Page 7 – POWER DOOR LOCK WIRING; NEGATIVE TRIGGER DOORLOCK WIRING; AFTERMARKET MOTOR/DOOR LOCK WIRING
  • Page 8 – TRANSMITTER PROGRAMMING; LED will be on solid.; transmitter for up
  • Page 9 – VEHICLE TRANSMITTER PROGRAMMING; PROGRAMMING SECOND VEHICLE:; TRANSMIT ICON
  • Page 10 – OPTION PROGRAMMING; PROGRAMMING OPTIONS CHART; Data Port Protocol
  • Page 11 – NOTE: Options can be instantly restored to Factory Default Values.
  • Page 12 – DOUBLE UNLOCK PULSE
  • Page 13 – OPTION PROGRAMMING Cont.; CARJACK FEATURES
  • Page 14 – ANTENNA DIAGRAM; WINDSHIELD; ANTENNA
  • Page 15 – WIRING DIAGRAM
  • Page 16 – DATA PORT DIAGRAM; iDATA LINK CABLE; Data Port; Bypass; BCM; OBD connector
Loading the manual





SP-300

2-WAY REMOTE CONTROL ALARM SYSTEM

INSTALLATION INSTRUCTIONS

INTRODUCTION

CONGRATULATIONS

on your choice of a Remote Alarm System by Crimestopper Security Products Inc.

This booklet contains the information necessary for installing, using, and maintaining your alarm system. If
any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at the Tech
Support number below.

*IMPORTANT INFORMATION: Primary and Optional Features:

-PRIMARY:

These are features that must be connected in order for the system to operate properly; i.e. the

Siren, L.E.D., +12V Power, Ground, Door pin, Flashing lights Override/Program/Valet Button etc.

-OPTIONAL:

These are features to be connected if desired or agreed upon by the installing dealer. These

features may also require additional parts and/or labor fees. Consult with your installer beforehand; i.e. Door
Locks, Starter disable, Hood/Trunk trigger, and Auxiliary Remote Outputs etc.

This installation book is designed for the installer or individual with an existing understanding of automotive
electrical systems, along with the ability to test and connect wires for proper operation. To ease installation,
we suggest that you READ THIS MANUAL before beginning your installation. This book is provided as a
GENERAL GUIDLINE and the information contained herein may differ from your vehicle.

TECH SUPPORT

Mon-Fri 8:00 AM-4:30 PM Pacific Time

(800) 998-6880


REV. 12-12-2008





This device complies with FCC Rules part 15. Operation is subject to
the following two conditions: 1) This device may not cause interference,
and (2) this device must accept any interference that may be received,
including interference that may cause undesired operation. The
manufacturer is not responsible for any radio or TV interference caused
by unauthorized modification to this equipment. Such modification
could void the user's authority to operate the equipment.

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; LED and Valet Programming Button..............................................................................................3; Data Port Diagram ....................................................................................................................16; INSTALLATION CAUTIONS & WARNINGS; WE RECOMMEND; before jump starting, using a battery; DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED; with brake, and gas pedals, steering

2 TABLE OF CONTENTS Installation Cautions & Warnings..…….……………………………….……………………………………….……2 Control Module & Component Mounting ……………...……………………..……………………….…….…..…..3 LED and Valet Programming Button………………………………………………………………………………….3 Wiring………………………………………………………………………..…………………..………….….…….….4-5 S...

Page 3 - CONTROL MODULE & COMPONENT MOUNTING; The

3 CONTROL MODULE & COMPONENT MOUNTING DO NOT Mount the control module in the engine compartment or where the wiring harness can become entangled with moving parts such as brake/gas/clutch pedals, or the steering column! The alarm control module should be mounted in a concealed location. The Plac...

Page 4 - WIRING; YELLOW WIRE: IGNITION SWITCHED “ON” AND “START” +12 VOLTS

4 WIRING GREEN WIRE: (-) NEGATIVE DOOR TRIGGER Identify the wire that reads ground when any door is open and 12 volts when all doors are closed. Some vehicles may have isolated door triggers. In this case you may need to run additional wires from other doors or go directly to the wire that triggers ...

Other Crimestopper Models

All Crimestopper Other