Crimestopper RS-4 - Manual
Crimestopper RS-4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PLAN OUT YOUR INSTALLATION
- Page 3 – INSTALLATION CAUTIONS & WARNINGS; result in damage to the unit not covered under warranty.; DO NOT; WIRING; BLACK: MAIN SYSTEM GROUND
- Page 5 – TAN
- Page 7 – PINK: NEGATIVE GLOW PLUG
- Page 9 – POWER DOOR LOCK WIRING CONNECTOR; 2V W hen using external relays (TERM 86)
- Page 10 – BASIC DOOR LOCK DIAGRAMS; NEGATIVE TRIGGER DOORLOCK WIRING
- Page 11 – “SMART TACHLESS” MODE; “SMART TACHLESS” ADJUSTMENT:
- Page 12 – TACH FINDER & USEFUL TIPS
- Page 13 – TACH PROGRAMMING & TACH SIGNALS; INTRODUCTION; EXAMINING THE TACH FREQUENCY WITH A DIGITAL MULTI-METER
- Page 14 – TIMED CRANK MODE; HOW TO USE THIS FEATURE:; attempt and may require a 2
- Page 15 – DIESEL GLOW PLUG DELAY; OPTION PROGRAMMING; OPTION PROGRAMMING CHART BEGINS ON NEXT PAGE
- Page 16 – Pink wire; Option
- Page 18 – OPTION DESCRIPTIONS; Remote Start & Auxiliary Output – Button Press Selection:
- Page 19 – Unlock With Trunk Pop or Trunk Pop Only:
- Page 21 – TRANSMITTER PROGRAMMING; Pink wire must be connected!; code, so repeat this; code, 4 flashes after the 3; code and 0 for 4
- Page 22 – VEHICLE PROGRAMMING; The; TROUBLESHOOTING: “BEFORE YOU CALL” SECTION; UNIT WILL NOT ATTEMPT TO START (KEYLESS ENTRY FUNCTIONS NORMALLY):
- Page 23 – MANUAL TRANSMISSION MODE; MANUAL TRANSMISSION EXIT PROCEDURE:; The 10-second time threshold activates when the door CLOSES.; Note: Turbo Timer Mode doesn’t work in Manual Transmission Mode.
- Page 24 – JUMPER PIN DIAGRAMS; JUMPER PINS; Control
- Page 25 – ANTENNA DIAGRAM; WINDSHIELD; DATA PORT; There are 2 types of
- Page 26 – LOW CURRENT PLUG; 2 PIN LOW CURRENT PLUG
- Page 27 – HIGH CURRENT PLUG; PIN HIGH CURRENT PLUG
- Page 28 – REMOTE START DIAGNOSTICS
RS-1 / RS-3 / RS-4
RS-00 (
ADD-ON MODULE
)
1 WAY SYSTEMS
REMOTE ENGINE STARTING SYSTEM
INSTALLATION INSTRUCTIONS
INTRODUCTION
CONGRATULATIONS
on your choice of a “Cool Start” System with Data Port Technology for direct connection to bypass
module by Crimestopper Security Products Inc. This booklet contains the information necessary for installing your remote
starter system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at the Tech
Support number below.
Note: Some features will not be available on units with 1 button, 3 button, and 4 button remotes.
DISCLAIMER
:
This installation book is designed for the installer or individual with an existing understanding of automotive electrical
systems, along with the ability to test and connect wires for proper operation. To ease installation, we suggest that you
READ THIS MANUAL
before beginning your installation. This book is provided as a GENERAL GUIDELINE and the
information contained herein may differ from your vehicle. Crimestopper Security Products, Inc. and its’ vendors shall not
be liable for any accident resulting from the use of this product. This system is designed to be professionally installed into
a vehicle in which all systems and associated components are in perfect working condition.
TECHNICAL SUPPORT: (800) 998-6880
Monday - Friday 8:00am - 4:30pm Pacific Std. Time
W eb Site: www.crimestopper.com
E-mail: [email protected]
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV 08-2008
This device complies with FCC Rules part 15. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference that
may be received, including interference that may cause undesired
operation. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modification could void the user’s authority to use the
equipment.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 TABLE OF CONTENTS Pre-Installation Considerations….………...……...………………………………………………………………..….………..2 Installation Cautions & Warnings………………………………………………………………………………..….....……..…3 Wiring……..……………………....…………………………………………………………………………………...………...3-7 Wiring High-Current Wiring…..…….…………………………………………………………...
3 INSTALLATION CAUTIONS & WARNINGS FOR SAFETY REASONS, DO NOT INSTALL in vehicles with MANUAL TRANSMISSIONS .** If accidentally left in gear, a remote started vehicle could become a self-propelled threat to life and property. DO NOT extend the Remote start ignition harness length. Mount the modu...
5 WIRING TAN: (-) AUX OUTPUT (TRUNK POP) or DOME LIGHT ILLUMINATION OUTPUT This output is programmable for 3 modes of operation. See Programming Option #9 Section. 1. 30 second Dome Light output. 2. Momentary ½ second output (Default). 3. Momentary Push and Hold. The output stays on until Transmitte...
