Crimestopper CS-2205 - Manual

Crimestopper CS-2205

Crimestopper CS-2205 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
28 Page 28
29 Page 29
30 Page 30
31 Page 31
32 Page 32
Page: / 32

Table of Contents:

  • Page 2 – TABLE OF CONTENTS; Main System Wiring Diagram.......................................................................................................................19; INSTALLATION CAUTIONS & WARNINGS; BEFORE BEGINNING
  • Page 3 – CONTROL MODULE/COMPONENT MOUNTING; For
  • Page 4 – RED/WHITE WIRE: INPUT SOURCE FOR FLASHING PARKING LIGHT; Normally Closed
  • Page 5 – DETERMINING DOOR LOCK TYPE:
  • Page 9 – WIRING 16-PIN CONNECTOR; Negative Dome Light System:
  • Page 11 – STARTER DISABLE DIAGRAM; NORMALLY CLOSED STARTER DISABLE; STARTER; NORMALLY OPEN STARTER
  • Page 13 – WINDSHIELD
  • Page 14 – PROGRAMMABLE OPTIONS; To Engage Option Programming:; interval between 1 second and 2 minutes); Latched output; pressed and will continue until the button is pressed again.; Latched output / reset with ignition; output but will reset or stop when the ignition is turned on.
  • Page 15 – PROGRAMMABLE OPTION TABLE; Function
  • Page 16 – AUTOLOCK WITH IGNITION
  • Page 20 – TRANSCEIVER / REMOTE CONTROL PROGRAMMING; will flash 3 times indicating its waiting for the 3; code and lights will flash 4 times for 4
  • Page 21 – STANDARD REMOTE; or
  • Page 22 – PARKING LIGHT:; ARM
  • Page 23 – Second Vehicle Security Operation:
  • Page 24 – OPERATION; Press the transmitter
  • Page 25 – Door lock with Ignition; SHOCK SENSOR BY-PASS; Press the
  • Page 26 – TAMPER DISARMING; button from 1-9 times, the horn and siren will chirp on each press.
  • Page 27 – EXAMPLE: To Override The System With The Password Code 83, you would; THE ACTION OF THE 2-WAY LED REMOTE CONTROL TRANSCEIVER
  • Page 29 – Program Mode For LED REMOTE TRANSCEIVER
  • Page 31 – BATTERY REPLACEMENT
  • Page 32 – REMOTE TRANSCEIVER DIAGNOSTICS; REMOTE SOUND
Loading the manual






CS-2205ADVTW1

Deluxe 2-Way LED Paging Security System


INSTALLATION & OPERATING INSTRUCTIONS

CONGRATULATIONS

on your choice of a Security System by Crimestopper Security Products Inc. This booklet contains

the information necessary for installing, using, and maintaining your CS-2205 Advantage alarm system. If any questions
arise, contact your installation dealer or Crimestopper Security Products Inc. at the Tech Support number below.

This installation book is designed for the installer or individual with an existing understanding of automotive electrical
systems, along with the ability to test and connect wires for proper operation.

To ease installation, we suggest that you

READ THIS MANUAL before beginning your installation. This book is provided as a GENERAL GUIDLINE and the
information contained herein may differ from your vehicle.

*IMPORTANT INFORMATION: Primary and Optional Features

-PRIMARY:

These are features that must be connected in order for the system to operate properly i.e. Siren, L.E.D., Power,

Ground, Door Pin, and Flashing Lights etc.

-OPTIONAL:

These are features are to be connected only if desired or agreed upon by the customer and the installing

dealer (i.e. Door Locks, Starter Disable, Hood/Trunk Protection and Auxiliary Remote Outputs etc.) These features may also
require additional parts and/or labor fees. Consult with your installer beforehand to be sure of what is going to be installed
with your particular system.

TECH SUPPORT
(800) 998-6880
Hours: M-F 8:00AM-4:30PM

Pacific Std. Time

REV B 6.2005

This device complies with FCC Rules part 15. Operation is subject to the following two
conditions: 1) This device may not cause interference, and (2) this device must accept any
interference that may be received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized
modification to this equipment. Such modification could void the user's authority to operate the
equipment.

SERIES I

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - TABLE OF CONTENTS; Main System Wiring Diagram.......................................................................................................................19; INSTALLATION CAUTIONS & WARNINGS; BEFORE BEGINNING

2 TABLE OF CONTENTS Installation Cautions & Warnings…….……………………………………………………………...………………………………..2 Suggested Component Mounting………….…………………………………………………………….……………………….…...3 Wiring (Connectors H1-H8)…………………………………………………………………………………………………………3-12 . Power Door Lock Wiring...………………………………………………………………..………...

Page 3 - CONTROL MODULE/COMPONENT MOUNTING; For

3 CONTROL MODULE/COMPONENT MOUNTING CONTROL MODULE: The alarm control module should be mounted in a concealed location. DO NOT mount the control unit in the engine compartment. Fasten the module to a bracket or wire harness using the cable ties provided. ANTENNA MODULE: For optimum range and perform...

Page 4 - RED/WHITE WIRE: INPUT SOURCE FOR FLASHING PARKING LIGHT; Normally Closed

4 RED/WHITE WIRE: INPUT SOURCE FOR FLASHING PARKING LIGHT Connect to a +12 Volt source or Chassis Ground depending on the vehicle Parking light circuit. WHITE WIRE: +12V FLASHING PARKING LIGHT OUTPUT (optional) Connect to switched parking light wire at back of light switch or connect directly to one...

Other Crimestopper Models

All Crimestopper Other