Crimestopper EZ-31DP/33DP/34DP - Manual
Crimestopper EZ-31DP/33DP/34DP – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – BEFORE BEGINNING
- Page 3 – INSTALLATION CAUTIONS & WARNINGS; result in damage to the unit not covered under warranty.; DO NOT; WIRING
- Page 5 – BROWN
- Page 8 – SEE DIAGRAM on NEXT PAGE
- Page 9 – IGN; OR; ACC
- Page 10 – POWER DOOR LOCK WIRING CONNECTOR; Plug-in pulse inverter that converts the; DETERMINING DOOR LOCK TYPE:
- Page 11 – BASIC DOOR LOCK DIAGRAMS; NEGATIVE TRIGGER DOORLOCK WIRING
- Page 12 – “SMART TACHLESS” MODE; “SMART TACHLESS” ADJUSTMENT:
- Page 13 – TACH FINDER & USEFUL TIPS; from starting and stalling in the morning or cold weather.; TACH PROGRAMMING & TACH SIGNALS
- Page 14 – These Tach Signal locations mentioned are provided; EXAMINING THE TACH FREQUENCY WITH A DIGITAL MULTI-METER
- Page 15 – TIMED CRANK MODE; HOW TO USE THIS FEATURE:; attempt and may require a 2
- Page 16 – DIESEL GLOW PLUG DELAY; OPTIONS PROGRAMMING; OPTION PROGRAMMING CHART BEGINS ON NEXT PAGE
- Page 17 – To Engage Option Programming:; Pink wire must be connected!
- Page 19 – OPTION DESCRIPTIONS:; Double Button Press for Remote start and Trunk release:
- Page 20 – Brown Output Wire Function: Trunk Pop or Dome Light Output; press within 3; Unlock With Trunk Pop or Trunk Pop Only:
- Page 22 – TRANSMITTER PROGRAMMING
- Page 23 – Press side button
- Page 24 – TROUBLESHOOTING: “BEFORE YOU CALL” SECTION; UNIT WILL NOT ATTEMPT TO START (KEYLESS ENTRY FUNCTIONS NORMALLY):
- Page 25 – JUMPER PIN DIAGRAMS
- Page 26 – ANTENNA DIAGRAM
- Page 27 – WINDSHIELD; Black Plug
- Page 28 – BATTERY; VEHICLE
- Page 29 – DATA PORT DIAGRAM; Please refer to OFA module manual; Data Port; © 2005Crimestopper Security Products
EZ-31DP/33DP/34DP 1-WAY SYSTEMS
EZ-64TW1/74TW2/84FM 2-WAY SYSTEMS
EZ-30DP Stand Alone unit
DP SERIES (Data port)
REMOTE ENGINE STARTING SYSTEM
INSTALLATION INSTRUCTIONS
INTRODUCTION
CONGRATULATIONS
on your choice of a “EZEE Start” System by Crimestopper Security Products Inc. This booklet
contains the information necessary for installing your remote starter system. If any questions arise, contact your
installation dealer or Crimestopper Security Products Inc. at the Tech Support number below.
DISCLAIMER:
This installation book is designed for the installer or individual with an existing understanding of automotive electrical
systems, along with the ability to test and connect wires for proper operation. To ease installation, we suggest that you
READ THIS MANUAL before beginning your installation. This book is provided as a GENERAL GUIDELINE and the
information contained herein may differ from your vehicle. Crimestopper Security Products, Inc. and its’ vendors shall
not be liable for any accident resulting from the use of this product. This system is designed to be professionally
installed into a vehicle in which all systems and associated components are in perfect working condition.
TECHNICAL SUPPORT: (800) 998-6880
This device complies with FCC Rules part 15. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference that
may be received, including interference that may cause undesired
operation. The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modification could void the user’s authority to use the
equipment.
Monday - Friday 8:00am - 4:30pm Pacific Std. Time
Web Site: www.crimestopper.com
E-mail: [email protected]
CRIMESTOPPER SECURITY PRODUCTS, INC.
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063
REV A 07.2005
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 TABLE OF CONTENTS Pre-Installation Considerations……….………...……...……………………………………………………………….……2 Installation Cautions & Warnings………………….……………………………………………………………….…..……3 Wiring……..…………………………....……………………………………………………………………………….…….3-7 Wiring High-Current Connector…….………………...…………………………………………………………………....
3 INSTALLATION CAUTIONS & WARNINGS **FOR SAFETY REASONS, DO NOT INSTALL in vehicles with MANUAL TRANSMISSIONS .** If accidentally left in gear, a remote started vehicle could become a self-propelled threat to life and property. DO NOT extend the Remote start ignition harness length. Mount the mo...
5 WIRING PIN 4: BROWN: (-) AUX OUTPUT (TRUNK POP) or DOME LIGHT ILLUMINATION OUTPUT This output is programmable for two modes of operation. See Programming Option Section. Mode (1) DEFAULT: Provides a Ground pulse when button #3 (Trunk) on the remote transmitter is pushed to activate a factory elect...