Crimestopper CS-2008PC - Manuals

Crimestopper CS-2008PC – Manual in PDF format online.

Manuals:

Manual

Manual Crimestopper CS-2008PC

Summary

Page 2 - The alarm control module should be mounted in; Driver’s Side Underdash; across from the driver’s side.

TABLE OF CONTENTS Pre-Installation Cautions & Warnings…….…………………………………………………………..………………1 Control Module & Component Mounting…………………..……………………….………………………..…….2-3 Wiring Descriptions.…………………………………………………………….……………………….……….…...3-4 System Wiring Diagrams #1 & #2……………………………………………………………….……………....

Page 3 - COMPONENT MOUNTING; This system includes a unique assembly that houses the LED and the; WIRING; PIN 1: BLACK WIRE: INPUT FROM VALET SWITCH

COMPONENT MOUNTING SIREN: Mount the siren under the hood to an inner fender-well, wheel-well, or other body surface with the open end facing downward. Run the red siren wire through the firewall using a rubber grommet. Ground the black to the body metal near the siren or you can use one of the siren...

Page 5 - SYSTEM WIRING DIAGRAM #1

Page 6 - SYSTEM WIRING DIAGRAM #2

Page 7 - SHOCK SENSOR; DUAL ADJUST Smart SenseTM Shock Sensor:; GREEN; SENSOR ADJUSTMENT WITH REMOTE CONTROL:; sensor and you trigger that sensor, you will hear 3 chirps.; LED; LED POD; MOUNTING INSTRUCTIONS:; DASH

SHOCK SENSOR DUAL ADJUST Smart Sense™ Shock Sensor: GREEN RED Pre-Warn Trigger The supplied dual stage / dual adjust shock sensor does not require any additional wiring. Just mount the sensor, plug in the “Sensor #1” input plug on the 2008PC harness and adjust to the desired levels of sensitivity fo...

Page 8 - POWER DOOR LOCK WIRING; Many Imports, Late Model Ford & General Motors; Single Wire Systems:; SEE DOORLOCK WIRING DIAGRAM – NEXT PAGE

POWER DOOR LOCK WIRING GREEN: (-) LOCK / (+) UNLOCK BLUE: (-) UNLOCK / (+) LOCK COMMON DOOR LOCK TYPES: (SEE FOR DESCRIPTIONS) Negative Trigger (-): Many Imports, Late Model Ford & General Motors Positive Trigger (+): Many GM, Chrysler/Dodge/Plymouth models: Reverse Polarity: Many Ford/Lincoln/M...

Page 9 - SEPARATE DRIVER’S DOOR UNLOCK DIAGRAMS; NEGATIVE TRIGGER DOOR LOCKS; WIRING FOR REVERSE POLARITY DOOR LOCKS

POWER DOOR LOCK WIRING NEGATIVE TRIGGER DOORLOCK WIRING POSITIVE TRIGGER DOORLOCK WIRING GREEN GREEN BLUE BLUE DIODES FACTORY FACTORY L L LOCK LOCK POWER POW ER LOCKING LOCKING UL UL RELAYS RELAYS UNLOCK UNLOCK IN4001 DIODES IN4001 AFTERMARKET MOTOR/DOOR LOCK WIRING REVERSE POLARITY DOOR LOCK WIRING...

Page 10 - REMOTE TRANSMITTER PROGRAMMING; Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3; hears 2 chirps and this will confirm Code-learning.; STATUS LED; VEHICLE PROGRAMMING; VEHICLE CONTROL; OPTION PROGRAMMING; PROGRAMMABLE OPTIONS:; you are in programming mode.

REMOTE TRANSMITTER PROGRAMMING 1. Turn Ignition ON and OFF 3 times quickly, leaving it ON the 3 rd time. (ON/OFF, ON/OFF, ON) You should hear (3) chirps. 2. Press the Program/Override Button for 5 seconds and you should hear 5 chirps and LED comes on solid. 3. Press #1 (LOCK) on the transmitter once...

Page 11 - OPTION PROGRAMMING TABLE; PROGRAMMING OPTIONS CHART; OPTION DESCRIPTIONS

OPTION PROGRAMMING TABLE PROGRAMMING OPTIONS CHART * = Default (Column 1) Option # Option Description BUTTON 1* LOCK BUTTON 2 UNLOCK BUTTON 3 TRUNK 1. Passive Arming/ Hands-free mode Passive OFF* Hands-free OFF* Passive Arming Enable Hands-free Mode Enable 2. Active Re-Arm / Hands-free Immobilizer A...

Page 12 - DOUBLE UNLOCK PULSE

OPTION DESCRIPTIONS 2. ACTIVE RE-ARMING / HANDS-FREE IMMOBILIZER This option controls the Active Re-arming feature and the Hands-free immobilizer. There are 3 selections: Button 1 (Lock) = Both Active Re-arming and Hands-free immobilizer are OFF. Button 2 (Unlock) = Enable Active Re-arming. Button 3...

Page 13 - REMOTE START IN VALET; Note: Engine must be running

OPTION PROGRAMMING 12. HORN OUTPUT / CARJACK WITH HANDS-FREE REMOTE (2 FEATURES) This option controls whether the system’s Factory Horn output AND full-time Carjack operation. There are 3 selections: Button 1 (Lock) = Horn Output Pulses on trigger and Full-time Carjack are disabled. Button 2 (Unlock...

Page 14 - OPTION RESET; CUSTOMIZED PERSONAL OVERRIDE CODE

OPTION RESET TO RESTORE ALL PROGRAMMABLE OPTIONS TO DEFAULT VALUES (*): 1. Turn the Ignition ON and press the Program/Override button 5 times. The siren will chirp 3 times indicating you are in programming mode. 2. Press the #3 Button (Trunk Symbol) on the Transmitter. The system will chirp (6) six ...

Page 15 - Convenient “hands-free” operation and additional security.; HANDS-FREE TRANSMITTER

“HANDS FREE” REMOTE CONTROL (OPTIONAL) This 2008PC system is compatible with an optional “Hands-free” remote transmitters (not included in kit). The “Hands-free” remote transmitter adds two important features. • Convenient “hands-free” operation and additional security. • Additional Security: When u...

Page 16 - CAR JACK PROTECTION FEATURES; PROGRAMMING CARJACK:; times and Carjack will now be enabled.; CARJACK WITH HANDS FREE REMOTE:; times and Hands-Free Carjack will now be enabled.

HANDS-FREE PROGRAMMING & SETUP NOTE: PASSIVE ARMING AND PASSIVE LOCKING MUST BE ENABLED ALONG WITH THE HANDS-FREE MODE. ENABLE HANDS FREE MODE: 1. Follow steps to enter Option Programming mode. (See page 7) 2. Press program button 1 time to get to option #1. 3. Press the Button #3 (Trunk Symbol)...

Page 17 - BUTTON 1; ALARM OPERATION; TRIGGERING THE ALARM:

5-BUTTON REMOTE OPERATION: 5-Button One-Way Remote Functions: PANIC BUTTON 1 BUTTON 3 BUTTON 2 BUTTON 4 BUTTON 5(ON SIDE) BANK #1 (Directly Press Buttons) Button 1: Arm / Lock Button 2: Disarm / Unlock Button 3: Aux #1 (Trunk Release) Button 4: Panic Button 5: (Change to BANK #2) BANK #2 (Press Butt...

Page 18 - If the system is armed, pressing Button #3 may

ALARM OPERATION PANIC FEATURE: In the event of an emergency situation or to attract attention to your vehicle, press and hold Button #4 (Panic). The Siren will sound and lights will flash for 30 seconds. Press Button #2 (Unlock) reset. ONE-TIME SHOCK SENSOR BYPASS: To arm the system and bypass the s...

Page 19 - FAUTLY ZONE ELIMINATION:; REMOTE-LESS DISARM “Beach Mode”; LED FLASHES VIOLATED ZONE

ALARM OPERATION DOME LIGHT ILLUMINATION: (Optional) This feature turns on the vehicle’s dome light upon disarm for 30 seconds or until the key is inserted and turned on. This will provide illuminated entry to your vehicle at night or in dimly lit areas for safety and security. FAULTY ZONE BYPASS: Wh...