Crimestopper CS-2004 WDC - Manual
Crimestopper CS-2004 WDC – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Installation Cautions & Warnings.................................................................................................3
- Page 3 – INSTALLATION CAUTIONS & WARNINGS; BEFORE BEGINNING; remove vehicle dome light fuse while working on the vehicle.; DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED; column, or any other moving parts in the vehicle.; CONTROL MODULE / COMPONENT MOUNTING; Mount the red; LED; in a visible location on the dashboard or console.
- Page 4 – WIRING; BLACK WIRE: CHASSIS GROUND
- Page 5 – OPTIONAL CAR JACK WIRING: SWITCH; HIDDEN BUTTON or; PINK; OPTIONAL CAR JACK WIRING:
- Page 6 – DETERMINING DOOR LOCK TYPE:
- Page 7 – POWER DOOR LOCK DIAGRAMS
- Page 8 – STARTER DISABLE WIRING; Normally Closed Starter disable
- Page 9 – JUMPER PLUG PROGRAMMING; SIDE VIEW; TOP OF MODULE; OPEN
- Page 10 – JUMPER P1: PASSIVE ARMING
- Page 11 – This jumper is not used for any alarm options.; JUMPER P9: REMOTE CARJACK FEATURE; TRANSMITTER PROGRAMMING; the parking lights come on solid.; transmitter code flashes 2X and third code
- Page 12 – ARM; BUTTON 2; OPERATION; BUTTON REMOTE TRANSMITTER: SECURWATCH® TRANSMITTER:; ACTIVE ARMING
- Page 14 – PASSIVE ARMING / PASSIVE LOCK MODES; Doorlock with
- Page 15 – CARJACK PROTECTION; on and press and hold the override button for at least 5 seconds.
CS-2004 WDC
Remote Control Alarm System with CoolGlow & SecurWatch®
INSTALLATION & OPERATING INSTRUCTIONS
INTRODUCTION:
CONGRATULATIONS
on your choice of a Remote Alarm System by Crimestopper Security Products Inc.
This system features both a
4-Button CoolGlow Transmitter
and a
SecurWatch® Sports Watch
Transmitter
that feature anti code-grabbing technology. The remote code changes with every use of the
transmitter making it impossible to scan or record the codes for use later on. This booklet contains the
information necessary for installing, using, and maintaining the many features of this alarm system. If any
questions arise, contact your installation dealer or Crimestopper Security Products Inc. at the Tech Support
number below.
*IMPORTANT INFORMATION: Primary and Optional Features
-PRIMARY:
These are features that must be connected in order for the system to operate properly i.e. Siren,
L.E.D., Power, Ground, Doorpin, etc.
-OPTIONAL:
These are features to be connected only if desired or agreed upon by the installing dealer (i.e.
Door Locks, Flashing Lights, Starter Kill, Hood, Trunk, and Auxiliary Remote Outputs etc.)
*NOTE:
If the system is programmed for Carjack Protection, AUX 1 will not be available when using the
SecurWatch® Remote Transmitter
.
AUX 1 can still be operated with the 4-Button CoolGlow transmitter
when the system is setup for Carjack.
This device complies with FCC Rules part 15. Operation is subject to the following
two conditions: 1) This device may not cause interference, and (2) this device
must accept any interference that may be received, including interference that may
cause undesired operation. The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modification to this equipment. Such
modification could void the user's authority to operate the equipment.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TABLE OF CONTENTS Installation Cautions & Warnings…….………………………………………………………………………………3 Suggested Component Mounting………….…………………………………………………………….…………..3 Wiring……..……………………………………………………………………………………………………….…….4-5 Carjack Wiring………………..……………………………………………………………………………………..……5 Wiring-Mini Plugs………………………………...
INSTALLATION CAUTIONS & WARNINGS BEFORE BEGINNING , check all vehicle manufacturer cautions and warnings regarding electrical service (AIR BAGS, ABS BRAKES, AND BATTERY). TO PREVENT A POSSIBLE DEAD BATTERY remove vehicle dome light fuse while working on the vehicle. MAKE CERTAIN TO REINSTALL FUS...
WIRING RED WIRE: +12V POWER INPUT (15 Amp Fuse) Connect to a +12 Volt source with the supplied fuse and fuse-holder. We recommend the connection to be at the Vehicle’s Battery Positive Terminal. BLACK WIRE: CHASSIS GROUND THIS WIRE MUST BE CONNECTED TO THE CHASSIS METAL OF THE VEHICLE. Scrape away a...
