Crimestopper FS-10 - Manual
Crimestopper FS-10 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Transmitter Programming..........................................................................................................7; INSTALLATION CAUTIONS & WARNINGS; BEFORE BEGINNING; or damage may occur. Electrical current limits for this alarm are; WE RECOMMEND that the MAIN SYSTEM FUSE be REMOVED; before jump starting, using a battery; DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED; with brake, and gas pedals, steering
- Page 3 – CONTROL MODULE MOUNTING; located by an intruder.; Driver’s Side Underdash; across from the driver’s side.; COMPONENT MOUNTING; Mount the Valet/Override/Program push-button in a hidden but
- Page 4 – WIRING; YELLOW WIRE: IGNITION SWITCHED “ ON ” AND “ START ” 12 VOLTS; and; “START”
- Page 5 – Connect to RED siren wire from the Siren in the engine compartment.; WHITE WIRE: Two 12V FLASHING LIGHT; The sensor supplied with; SENSOR ADJUSTMENT
- Page 6 – POWER DOOR LOCK WIRING; NEGATIVE TRIGGER DOORLOCK WIRING
- Page 7 – REMOTE TRANSMITTER PROGRAMMING; is waiting for a 2; and flash the lights 3 times indicating its waiting for the 3; code and 4 times. If all 3 codes are learned,
- Page 8 – OPTION PROGRAMMING; flash the lights 5 times.; PROGRAMMING OPTIONS CHART
- Page 9 – NOTE: Options can be instantly restored to Factory Default Values.; IGNITION CONTROLLED LOCKS
- Page 10 – OPTION PROGRAMMING Cont.; DOUBLE UNLOCK PULSE; increase the risk of locking keys in the vehicle.
- Page 11 – OPERATING INSTRUCTIONS
- Page 12 – OPERATING INSTRUCTIONS Cont.; ALARM TRIGGER RESET
- Page 13 – EMERGENCY OVERRIDE & DISARM
- Page 14 – CARJACK PROTECTION; ACTIVE CARJACK
- Page 15 – LED / VALET SWITCH MOUNTING; the Alarm System is Armed.; WIRING: SHOCK SENSOR; RED
- Page 16 – WIRING DIAGRAM FS-10
1
FS-10
REMOTE CONTROL ALARM SYSTEM
INSTALLATION & OPERATING INSTRUCTIONS
INTRODUCTION
CONGRATULATIONS
on your choice of a “
Fortress
” Remote Alarm System by Crimestopper Security
Products Inc. This booklet contains the information necessary for installing, using, and maintaining your alarm
system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at the
Tech Support number below.
This installation book is designed for the installer or individual with an existing understanding of automotive
electrical systems, along with the ability to test and connect wires for proper operation. To ease installation,
we suggest that you READ THIS MANUAL before beginning your installation. This book is provided as a
GENERAL GUIDLINE and the information contained herein may differ from your vehicle.
TECH SUPPORT
Mon-Fri 8:00 AM-4:30 PM Pacific Time
Phone (800) 998-6880
FAX (805) 581-9500
REV. B 02.2009
This device complies with FCC Rules part 15. Operation is subject to
the following two conditions: 1) This device may not cause interference,
and (2) this device must accept any interference that may be received,
including interference that may cause undesired operation. The
manufacturer is not responsible for any radio or TV interference caused
by unauthorized modification to this equipment. Such modification
could void the user's authority to operate the equipment.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 TABLE OF CONTENTS Installation Cautions & Warnings…….………………………………………………………….……….…….……2 Control Module & Component Mounting…………….………………………..…………………..….….…….…..3 Wiring……..……………………………………………………………………………………………………...…….4-5 Power Door Lock Wiring...…………………………………………………….………..………………….…………6 Transmi...
3 CONTROL MODULE MOUNTING DO NOT Mount the control unit in the engine compartment! DO NOT Mount the control unit or wiring harness where they can become entangled with moving parts such as brake/gas/clutch pedals, or the steering column! The alarm control module should be mounted in a concealed loca...
4 WIRING GREEN WIRE: (-) DOOR TRIGGER Identify the wire that reads ground when any door is open and 12 volts when all doors are closed. Some vehicles may have isolated door triggers. In this case you may need to run additional wires from other doors or go directly to the wire that triggers the vehic...
