Crimestopper CS-882 OEM - Manual
Crimestopper CS-882 OEM – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Installation Modes “A” & “B”.........................................................................................................6-7; INSTALLATION PRECAUTIONS & WARNINGS; BEFORE BEGINNING; with brake, and gas pedals, steering; COMPONENT MOUNTING; Mount button in a hidden but accessible location. It is
- Page 3 – WIRING; NORMALLY OPEN; BLACK WIRE: SYSTEM CHASSIS GROUND
- Page 4 – YELLOW WIRE: +12 VOLTS IGNITION SWITCHED; Connect to door pin activation circuit in vehicle:
- Page 5 – **SEE DOOR LOCK MOTOR / VALIDATION WIRE CONNECTIONS NEXT PAGE; The sensor supplied with this system does not
- Page 6 – MODE A; is the default mode and is used for most vehicles.
- Page 7 – INSTALLATION MODE “B”; MODE B; Unlock
- Page 8 – SYSTEM WIRING DIAGRAM
- Page 9 – PROGRAMMABLE OPTIONS; OPTION PROGRAMMING CHART; DOOR WARNING DELAY
- Page 10 – DOOR TRIGGER POLARITY
- Page 11 – OPERATING INSTRUCTIONS; ARMING
- Page 12 – OPERATING INSRUCTIONS; VALET MODE
CS-882 OEM
ALARM UPGRADE FOR FACTORY KEYLESS ENTRY SYSTEMS
INSTALLATION & OPERATING INSTRUCTIONS
INTRODUCTION
CONGRATULATIONS
on your choice of an Alarm Upgrade System by Crimestopper Security Products Inc. This
booklet contains the information necessary for installing, using, and maintaining this system. If any questions
arise, contact your installation dealer or Crimestopper Security Products Inc. at the Tech Support number below.
*IMPORTANT INFORMATION:
This system does not improve or affect the range of the factory remote keyless entry transmitters. This is
an ADD-ON system only. The arm/disarm range of this system will be identical to that of the Factory
Keyless System’s lock/unlock range.
This installation book is designed for the installer or individual with an existing understanding of automotive
electrical systems, along with the ability to test and connect wires for proper operation. To ease installation, we
suggest that you READ THIS MANUAL before beginning your installation. The information contained in this
manual is provided as a GENERAL GUIDLINE and it may differ from your vehicle! If you are not confident with
performing the installation steps as required by this system, we suggest seeking professional installation.
TECH SUPPORT
Mon-Fri 8:00 AM-4:30 PM Pacific Time
(800) 998-6880
REV. C 6/2005 SW: PG30800030CT3
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
TABLE OF CONTENTS Installation Cautions & Component Mounting…….……………….…………………………………………………..2 Wiring………………………………………………………………………………………………..…………….…………3-5 Installation Modes “A” & “B”……………………………………………………………………………………………6-7 System Wiring Diagram………………………………………………………………………………….………………….8 Programmabl...
WIRING (2) VIOLET WIRES: ON-BOARD RELAY (10A) IMMOBILIZER CIRCUIT #1 NORMALLY OPEN These wires come directly from the terminals of an on-board Relay to immobilize the Coil or Fuel Pump Circuit in the vehicle. Selected the circuit you want to interrupt, cut it, and connect each cut end to a VIOLET wi...
WIRING PINK & PINK/WHITE WIRE: ON-BOARD RELAY (10A) IMMOBILIZER CIRCUIT #2 NORMALLY OPEN These wires come directly from the terminals of an on-board relay to immobilize the Coil or Fuel Pump Circuit in the vehicle. Select the circuit you want to immobilize, cut it, and connect one end to the Pin...
