Crimestopper CS-2000DP-TW2 - Manual
Crimestopper CS-2000DP-TW2 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – TABLE OF CONTENTS; Data Port Diagram ......................................................................................................................8; INSTALLATION CAUTIONS & WARNINGS; BEFORE BEGINNING; before jump starting, using a battery; DO NOT ROUTE ANY WIRING THAT MAY BECOME ENTANGLED; with brake, and gas pedals, steering
- Page 3 – CONTROL MODULE & COMPONENT MOUNTING; Mount the red LED in a visible location on the dashboard or console.; WIRING
- Page 4 – BLACK WIRE: SYSTEM CHASSIS GROUND
- Page 5 – Connect to RED siren wire from the Siren in the engine compartment.; OUTPUT; VALET / PROGRAM SWITCH
- Page 6 – WIRING: SHOCK SENSOR; The sensor supplied; POWER DOOR LOCK WIRING; SENSOR ADJUSTMENT
- Page 7 – NEGATIVE TRIGGER DOORLOCK WIRING; AFTERMARKET MOTOR/DOOR LOCK WIRING
- Page 8 – DATA PORT DIAGRAM; iDATA LINK CABLE; Data Port; OFA; BCM; OBD connector
- Page 9 – TRANSMITTER PROGRAMMING; LED will be on solid.; transmitter for up; VEHICLE TRANSMITTER PROGRAMMING; PROGRAMMING SECOND VEHICLE:
- Page 10 – OPTION PROGRAMMING; PROGRAMMING OPTIONS CHART
- Page 11 – Doors will not lock if they are open to prevent locking the keys in
- Page 12 – DOUBLE UNLOCK PULSE
- Page 14 – OPERATING INSTRUCTIONS (REMOTE OPERATIONS); ONE WAY SIDEKICK REMOTE:; BUTTON FUNCTIONS; Press & Hold for more than 3 sec. to activate “Panic” feature.; LOCK
- Page 15 – BUTTON 5; Press and release to light up
- Page 16 – OPERATION INSTRUCTIONS (LCD PANEL FUNCTIONS SHOWN)
- Page 17 – OPERATION INSTRUCTIONS; ALARM TRIGGERING
- Page 18 – OPERATING INSTRUCTIONS; SELECTIVE SILENT ARM/DISARM THROUGH REMOTE CONTROL
- Page 19 – PRIOR INTRUSION ALERT; Doors will not lock if they are open to
- Page 20 – CARJACK PROTECTION FEATURES; ACTIVE CARJACK
- Page 21 – ANTENNA DIAGRAM; WINDSHIELD
- Page 22 – WIRING DIAGRAM
- Page 23 – LOW BATTERY WARNING – LCD REMOTE; LOW BATTERY WARNING; Replacing the Battery
CS-2000DP-TW2
2-WAY REMOTE CONTROL ALARM SYSTEM
INSTALLATION & OPERATING INSTRUCTIONS
INTRODUCTION
CONGRATULATIONS
on your choice of an “On-Guard” Remote Alarm System by Crimestopper Security
Products Inc. This booklet contains the information necessary for installing, using, and maintaining your alarm
system. If any questions arise, contact your installation dealer or Crimestopper Security Products Inc. at the
Tech Support number below.
*IMPORTANT INFORMATION: Primary and Optional Features:
-PRIMARY:
These are features that must be connected in order for the system to operate properly; i.e. the
Siren, L.E.D., +12V Power, Ground, Door pin, Flashing lights Override/Program/Valet Button etc.
-OPTIONAL:
These are features to be connected if desired or agreed upon by the installing dealer. These
features may also require additional parts and/or labor fees. Consult with your installer beforehand; i.e. Door
Locks, Starter disable, Hood/Trunk trigger, and Auxiliary Remote Outputs etc.
This installation book is designed for the installer or individual with an existing understanding of automotive
electrical systems, along with the ability to test and connect wires for proper operation. To ease installation,
we suggest that you READ THIS MANUAL before beginning your installation. This book is provided as a
GENERAL GUIDLINE and the information contained herein may differ from your vehicle.
TECH SUPPORT
Mon-Fri 8:00 AM-4:30 PM Pacific Time
(800) 998-6880
REV. A 2-15-2006
This device complies with FCC Rules part 15. Operation is subject to
the following two conditions: 1) This device may not cause interference,
and (2) this device must accept any interference that may be received,
including interference that may cause undesired operation. The
manufacturer is not responsible for any radio or TV interference caused
by unauthorized modification to this equipment. Such modification
could void the user's authority to operate the equipment.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 TABLE OF CONTENTS Installation Cautions & Warnings..…….……………………………….……………………………………….……2 Control Module & Component Mounting ……………...……………………..……………………….…….…..…..3 Wiring (LED, PROGRAM BUTTON AND SHOCK SENSOR page 5-6)…………………..………….….…..….3-6 Power Door Lock Wiring……………………………………………………….…………...
3 CONTROL MODULE & COMPONENT MOUNTING DO NOT Mount the control unit in the engine compartment or where the control unit or wiring harness where they can become entangled with moving parts such as brake/gas/clutch pedals, or the steering column! The alarm control module should be mounted in a con...
4 WIRING BLACK WIRE: SYSTEM CHASSIS GROUND The Black wire MUST be connected the CHASSIS METAL of the vehicle. Scrape away any paint or debris from the connection point and use a star washer to ensure a good connection. Keep the ground wire short. YELLOW WIRE: IGNITION SWITCHED “ON” AND “START” +12 V...
