Chicago Electric 97593 - Manual
Chicago Electric 97593 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – saVE this Manual; iMpOrtant saFEtY; general power tool safety; The term ′′power tool′′ in the; the presence of flammable liquids,; sparks which may ignite the dust or
- Page 3 – or under the influence of drugs,
- Page 4 – a qualified repair person using; belt sander safety Warnings; maintain a firm grip on the tool with
- Page 5 – Vibration safety
- Page 6 – hands and fingers, increasing the risk; saVE thEsE; grOunding; Check with a qualified; grounded tools: tools with three
- Page 7 – which satisfies OSHA requirements; (see Outlets for 2‐prong; Extension cords; Grounded
- Page 8 – symbology
- Page 9 – spEciFicatiOns; unpacKing; tool set up
- Page 10 – general Operating instructions; Pull out the Belt Release Lever. Re
- Page 11 – Procedures not specifically; lubrication; when first used until they wear and; be replaced only by a qualified
- Page 12 – troubleshooting; problem; tool. disconnect power supply before service.; plEasE rEad thE FOllOWing carEFullY
- Page 13 – part; able individually as replacement parts.; parts list
- Page 14 – assEMblY diagraM (cOntinuEd On nEXt pagE)
- Page 15 – assEMblY diagraM
- Page 16 – liMitEd 1 YEar WarrantY; THIS WARRANTy IS ExPRESSLy IN LIEU Of ALL OTHER WARRANTIES,
ElEctric bElt sandEr
4”x24”
Model
97593
sEt up and OpErating instructiOns
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
saVE this Manual.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-
ments, actual product may differ slightly from the product described herein. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1‑800‑444‑3353.
Manual revised 10g
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 97593 For technical questions, please call 1‑800‑444‑3353. Page 2 saVE this Manual Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...
SKU 97593 For technical questions, please call 1‑800‑444‑3353. Page 3 Unmodified plugs and matching out - lets will reduce risk of electric shock. avoid body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your bod...
SKU 97593 For technical questions, please call 1‑800‑444‑3353. Page 4 power tool use and care 4. do not force the power tool. use a. the correct power tool for your ap‑ plication. The correct power tool will do the job better and safer at the rate for which it was designed. do not use the power tool...
