Chicago Electric 94649 - Manual
Chicago Electric 94649 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 4 – Note; Extension cord usage may also affect tool performance.
- Page 5 – House Sump; DANGER; ON
- Page 6 – Troubleshooting; Maintenance; Warning: Disconnect power before performing any maintenance.; in clean water to flush out system.
- Page 7 – Parts List
- Page 8 – Assembly Drawing
- Page 9 – WARRANTY; LIMITED 90 DAY WARRANTY
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright © 2006 by Harbor Freight Tools
®
. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
94649
®
3/4 HP DIRTY WATER SUBMERSIBLE
PUMP WITH FLOAT
Due to continuing improvements, the product shown above may differ slightly from the actual product.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 4 SKU 94649 Unpacking When unpacking, check to make sure all parts are included. Refer to the parts list and as-sembly diagram on page 7 and 8. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual. Operation 1. Connect drain hose to the ...
Page 5 SKU 94649 House Sump Removing UndergroundWater Accumulated From Rain Gutter ON - OFF Switch Operation ON OFF H 2 O H 2 O 1/8” HOLERecommended Check Valve Electrical Connection Ground Fault Circuit Interrupter DANGER Never Touch Float (1) or Water During Pump Operation DANGER H 2 O H 2 O H 2 O...
Page 6 SKU 94649 Troubleshooting SYMPTOM CAUSE SOLUTION The pump will not start No powerImpeller blockedThermal protection shutdownEntangled Float Switch Check power source; Reset GFCIFree impeller (see Maint.)Allow pump to cool down; auto restartCheck Float Switch The pump operates but pumps little...
