Chicago Electric 94626 - Manual
Chicago Electric 94626 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; SAVE THIS MANUAL; GENERAL SAFETY RULES; SAVE THESE INSTRUCTIONS; Work Area; Keep your work area clean and well lit.; Cluttered benches and dark areas invite
- Page 3 – Electrical Safety; Do not expose power tools to rain or wet conditions.; Personal Safety; Avoid accidental starting.
- Page 5 – SPECIFIC SAFETY RULLES FOR THIS PRODUCT
- Page 8 – either a two or three wire extension cord.
- Page 9 – SYMBOLOGY; UNPACKING
- Page 10 – Place the Saw where the flush cut is to be made. See photo below.
- Page 11 – Replacing the Carbon Brushes
- Page 12 – Installing the Saw Blade; clockwise using the Hex Wrench with the other hand.; TROUBLESHOOTING
- Page 13 – PLEASE READ THE FOLLOWING CAREFULLY
- Page 14 – ASSEMBLY DRAWING
- Page 15 – LIMITED 90 DAY WARRANTY; vary from state to state.
3-3/8 INCH BLADE TOE KICK SAW
94626
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 94626 For technical questions, please call 1-800-444-3353 SPECIFICATIONS SAVE THIS MANUAL You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the in...
Page 3 SKU 94626 For technical questions, please call 1-800-444-3353 Electrical Safety 4. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 5. Do not expose power tools to rain or wet ...
Page 5 SKU 94626 For technical questions, please call 1-800-444-3353 SPECIFIC SAFETY RULLES FOR THIS PRODUCT 1. DANGER! Keep hands away from cutting area and blade. Keep your second hand on auxiliary handle or motor housing. If both hands are holding the saw, they cannot be cut by the blade. Keep yo...
