Chicago Electric 94488 - Manual
Chicago Electric 94488 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA
- Page 3 – “Do not
- Page 4 – SERVICE; section of this manual.; SPECIFIC SAFETY GENERAL RULES AND PRECAUTIONS; Industrial applications must follow OSHA guidelines.; FIRE AND EXPLOSION PRECAUTIONS; Keep the Cut Off Saw and surrounding areas clean at all times.
- Page 5 – Never store fuel or other flammable materials near the Cut Off Saw.; MECHANICAL PRECAUTIONS; Always follow scheduled Cut Off Saw and Engine maintenance.; CHEMICAL PRECAUTIONS; Only use Saw Blades with the following specifications:
- Page 6 – KICKBACK PRECAUTIONS
- Page 8 – When unpacking, check to make sure all the parts shown on the; Parts Lists on pages; PRODUCT FEATURES
- Page 10 – FIGURE A
- Page 11 – ASSEMBLY INSTRUCTIONS; To Install A Saw Blade:; page 6 of; sure the; Do not use the Cut Off Saw if the Guard assembly does; PRE-START INSTRUCTIONS; To Fill The Fuel Tank:
- Page 12 – FUEL MIX QUANTITIES; Table A; OPERATING INSTRUCTIONS; To Start The Cut Off Saw:; FIGURE B
- Page 16 – FIGURE E
- Page 17 – TROUBLESHOOTING; Problem; PLEASE READ THE FOLLOWING CAREFULLY
- Page 19 – Part Description
- Page 20 – Part
- Page 25 – Handle Bracket; Wheel
- Page 26 – LIMITED 90 DAy
14” GAS PORTABLE CUT
OFF SAW
Model
94488
ASSEMBLY AND OPERATING INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
CAUTION!
Your Warranty Is Voided If:
You do not operate the Cut Off Saw with the proper 50:1 fuel mix in its Fuel Tank.
SEE PAGES 12 AND 13 OF THIS MANUAL FOR FUEL MIX INSTRUCTIONS.
Never run the Engine with an improper fuel mix, low or no fuel mix.
Running the Engine with an improper fuel mix, low or no fuel mix will permanently damage the unit.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ
AND UNDERSTAND ALL WARNINGS AND
INSTRUCTIONS BEFORE USE.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 2 PRODUCT SPECIFICATIONS Required Saw Blade Type 14” Diameter (Not Included)7/64” to 1/4” ThicknessComposite Abrasive or Diamond AbrasiveRated at a Minimum 4700 RPM1” Diameter Spindle Hole Maximum Saw Blade Speed 4700 RPMSaw Blade Ro...
SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 3 Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Provide barriers or shields as needed. PERSONAL SAFETY Stay alert. Watch what you are doing, and use common sens...
SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 4 SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Fol...
