Chicago Electric 94488 - Manuals

Page 2 - READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 2 PRODUCT SPECIFICATIONS Required Saw Blade Type 14” Diameter (Not Included)7/64” to 1/4” ThicknessComposite Abrasive or Diamond AbrasiveRated at a Minimum 4700 RPM1” Diameter Spindle Hole Maximum Saw Blade Speed 4700 RPMSaw Blade Ro...

Page 3 - “Do not

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 3 Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. Provide barriers or shields as needed. PERSONAL SAFETY Stay alert. Watch what you are doing, and use common sens...

Page 4 - SERVICE; section of this manual.; SPECIFIC SAFETY GENERAL RULES AND PRECAUTIONS; Industrial applications must follow OSHA guidelines.; FIRE AND EXPLOSION PRECAUTIONS; Keep the Cut Off Saw and surrounding areas clean at all times.

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 4 SERVICE Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. Fol...

Page 5 - Never store fuel or other flammable materials near the Cut Off Saw.; MECHANICAL PRECAUTIONS; Always follow scheduled Cut Off Saw and Engine maintenance.; CHEMICAL PRECAUTIONS; Only use Saw Blades with the following specifications:

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 5 Never store fuel or other flammable materials near the Cut Off Saw. Do not smoke, or allow sparks, flames, or other sources of ignition around the Cut Off Saw. Keep grounded conductive objects, such as tools, away from exposed, liv...

Page 6 - KICKBACK PRECAUTIONS

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 6 Only composite abrasive or diamond abrasive Saw Blades rated at a mini-mum of 4,700 RPM. Never use carbide-tipped, woodcutting, or circular machine Saw Blades. They can cause severe personal injury from reactive forces, blade conta...

Page 8 - When unpacking, check to make sure all the parts shown on the; Parts Lists on pages; PRODUCT FEATURES

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 8 area, and work with approved safety equipment, such as those dust masks that are specially designed to filter out microscopic particles. (California Health & Safety Code § 25249.5, et seq. ) WARNING! People with pacemakers shou...

Page 10 - FIGURE A

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 10 23F (NOT INCLUDED) 5E 6E 2E, 3E 4E 13E 7B 35F 16C 38F 34F FIGURE A 22F 25F 19F 3G 4D 5D 9D . 10D 7D 5C 3A 9B 24F

Page 11 - ASSEMBLY INSTRUCTIONS; To Install A Saw Blade:; page 6 of; sure the; Do not use the Cut Off Saw if the Guard assembly does; PRE-START INSTRUCTIONS; To Fill The Fuel Tank:

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 11 ASSEMBLY INSTRUCTIONS CAUTION! Make sure to wear ANSI-approved safety impact eyeglasses when performing any assembly of the Cut Off Saw. Also, when installing or replacing the Saw Blade (23F) (not included) wear heavy duty work gl...

Page 12 - FUEL MIX QUANTITIES; Table A; OPERATING INSTRUCTIONS; To Start The Cut Off Saw:; FIGURE B

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 12 Once the proper fuel mix is obtained, remove the Fuel Tank Cap (16C). Fill the Fuel Tank (2C, 10C) approximately 3/4 full with the fuel mix (the Fuel Tank capacity is 0.4 gallons). Then, replace the Fuel Tank Cap. (See Figure A.) ...

Page 16 - FIGURE E

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 16 Remove the Spark Plug Wire (18). Then, unscrew and remove the Spark Plug (2B). (See Figure E.) Clean off the carbon build-up on the Spark Plug (2B). (See Figure E.) Check the electrode gap to see if it is 0.020”. If necessary, rea...

Page 17 - TROUBLESHOOTING; Problem; PLEASE READ THE FOLLOWING CAREFULLY

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 17 TROUBLESHOOTING Problem Possible Solution Engine will not start or runs poorly. Check for amount of fuel.Make sure Choke Lever is in proper position.Make sure Spark Plug Wire is not loose.Check condition of Spark Plug. Wipe off an...

Page 19 - Part Description

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 19 PARTS LIST/ASSEMBLY DIAGRAM CRANKSHAFT & PISTON ASSEMBLY NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. 1A 2A 3A 4A 5A 30A 6A 7A 8A 9A 10A 11A 12A...

Page 20 - Part

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 20 PARTS LIST/ASSEMBLY DIAGRAM CYLINDER & MUFFLER ASSEMBLY NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Part Description Qty. 1B Cylinder 1 2B Spar...

Page 25 - Handle Bracket; Wheel

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 25 PARTS LIST/ASSEMBLY DIAGRAM FRONT HANDLE & SUPPORT ASSEMBLY 1G 2G 3G 4G 5G 6G 7G 8G 9G 10G NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Part Des...

Page 26 - LIMITED 90 DAy

SKU 94488 For technical questions, please call 1-800-444-3353 PAGE 26 Emission Control System Warranty United States Emission Control Defects Warranty Statement The the United States Environmental Protection Agency (herein EPA) and Harbor Freight Tools ® (herein HFT) are pleased to explain the emiss...