Chicago Electric 93853 - Manual
Chicago Electric 93853 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SpEcIFIcATIONS; SAVE THIS MANuAL; gENERAL SAFETY RuLES; WARNINg! Read all instructions; The term “power tool” in all of the warnings listed; SAVE THESE INSTRucTIONS; WORK AREA; Keep your work area clean and well lit.; Cluttered benches and dark areas; Do not operate power tools in explosive atmospheres, such as in the; Power tools create sparks
- Page 4 – TOOL uSE AND cARE
- Page 5 – SERVIcE; SpEcIFIc SAFETY RuLES; Keep hands, fingers, and feet safely away from the cutting area.
- Page 8 – VIBRATION HAzARD; and shoulders. To reduce the risk of vibration-related injury:
- Page 9 – gROuNDINg; Check with a qualified electrician if you are in doubt as to; grounded Tools: Tools with Three prong plugs; to an electrically “live” terminal.; Double Insulated Tools: Tools with Two prong plugs; WARNINg
- Page 10 – Extension cords; Grounded
- Page 11 – Symbology
- Page 12 – uNpAcKINg; parts List on page; pRODucT FEATuRES; Assembly Diagrams; Prior to the Demolition Hammer’s first use, remove the Oil Cap
- Page 13 – FIguRE F; OpERATINg INSTRucTIONS; WARNINg! Always wear ANSI-approved safety impact eye glasses and
- Page 15 – Every 70 to 80 hours of tool use:; Remove the Oil Cap (45) and replace the; grease; only be performed by a qualified service technician.; FIguRE g
- Page 16 – TROuBLESHOOTINg; problem; pLEASE READ THE FOLLOWINg cAREFuLLY
- Page 17 – pARTS LIST
- Page 18 – ASSEMBLY DIAgRAM
- Page 19 – LIMITED 1 YEAR / 90 DAY WARRANTY; WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
DEMOLITION HAMMER
Model
93853
SET up AND OpERATINg INSTRucTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAL.
Copyright
©
2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improve-
ments, actual product may differ slightly from the product described herein. Tools required for assembly
and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10d
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 2 SpEcIFIcATIONS Electrical Requirements 120 V~ / 60 Hz / 1500 W 20 A (Start Up) / 9.5 A (No Load) / 13.0 A (With Load) Power Cord Type: 82” Long / 14 AWG x 2C Power Cord Plug Type: 2-Prong / Polarized Power Switch Type: 2-Position T...
SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 4 Remove adjusting keys or wrenches before turning the power tool on. 4. A wrench or a key that is left attached to a rotating part of the power tool may result in personal injury. Do not overreach. Keep proper footing and balance at...
SKU 93853 For technical questions, please call 1-800-444-3353 PAGE 5 SERVIcE Tool service must be performed only by qualified repair personnel. 1. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only identical replacement parts. ...
