Chicago Electric 92456 - Manual
Chicago Electric 92456 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – GENERAL SAFETy RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.; ELECTRICAL SAFETy; Parts Lists on
- Page 4 – Do not expose power tools to rain or wet conditions.; PERSONAL SAFETy; Do not overreach. Keep proper footing and balance at all times.
- Page 5 – GENERATOR USE AND CARE; Maintain generators with care.; SERVICE; Maintain labels and nameplates on the Generator and Engine.
- Page 6 – SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS; INSTALLATION PRECAUTIONS
- Page 7 – FIRE AND EXPLOSION PRECAUTIONS
- Page 8 – make sure the Power Switch is in its “OFF” position. Disconnect the; CHEMICAL PRECAUTIONS
- Page 9 – If an extension cord (not included) is used, make sure to use only UL; FIGURE A
- Page 10 – Insulate all connections and disconnected wires.; INSTALLATION; The Generator is quite heavy. Use care and the proper lifting or; GENERAL LOCATION
- Page 11 – Assembly Diagrams; Check to make sure the Engine’s Power Switch (2) is in its; “OFF”; To do so, unscrew and remove the Engine’s Oil Dipstick (65A) located; upper marked line; stick back into the Oil Fill Hole.
- Page 13 – plugged in to the Generator.; “ON”
- Page 15 – Powering 120 Volt AC Tools And Equipment:; Powering 12 Volt DC Tools And Equipment:
- Page 16 – FIGURE H; The Generator features a 10 AMP DC Fuse (9) to protect the DC circuit; Always make sure the Engine Power Switch (2) is in its “OFF” po-; inspect the general condition of the Generator. Check for loose; Do not use damaged equipment.
- Page 17 – Follow all maintenance procedures as outlined in the; Engine Maintenance Sched-; check to make sure the Engine’s oil level is adequate. If neces-; Engine Maintenance Schedule; Interval; Details
- Page 18 – able individually as replacement parts.; PARTS LIST
- Page 19 – ASSEMbLy DIAGRAM
- Page 20 – PARTS LIST - CONTINUED
- Page 21 – ASSEMbLy DIAGRAM - CONTINUED
- Page 22 – WIRING DIAGRAM
- Page 23 – YEAr; Emission Control System Warranty; Defects Warranty Coverage; Owner’s Warranty Responsibilities
GENERATOR SET
6.5 HP - RECOIL START - 2600W/2800W RATED
Model 92456
OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright
©
2004 by Harbor Freight Tools
®
. All rights reserved. No
portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
TO PREVENT SERIOUS INjURy OR DEATH,
READ AND UNDERSTAND ALL WARNINGS
AND INSTRUCTIONS bEFORE USE.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 92456 For technical questions, please call 1-800-444-3353. Page 3 GENERAL SAFETy RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS WORK AREA Keep your work area cl...
SKU 92456 For technical questions, please call 1-800-444-3353. Page 4 Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain or wet conditions. Water enter...
SKU 92456 For technical questions, please call 1-800-444-3353. Page 5 GENERATOR USE AND CARE Make sure the Power Switch is in its “OFF” position and disconnect the spark plug wire before making any adjustments, changing accessories, or storing the generator. Such preventive safety measures reduce th...
