Chicago Electric 92456 - Manuals

Chicago Electric 92456 – Manual in PDF format online.

Manuals:

Manual

Manual Chicago Electric 92456

Summary

Page 3 - GENERAL SAFETy RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.; ELECTRICAL SAFETy; Parts Lists on

SKU 92456 For technical questions, please call 1-800-444-3353. Page 3 GENERAL SAFETy RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS WORK AREA Keep your work area cl...

Page 4 - Do not expose power tools to rain or wet conditions.; PERSONAL SAFETy; Do not overreach. Keep proper footing and balance at all times.

SKU 92456 For technical questions, please call 1-800-444-3353. Page 4 Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. Do not expose power tools to rain or wet conditions. Water enter...

Page 5 - GENERATOR USE AND CARE; Maintain generators with care.; SERVICE; Maintain labels and nameplates on the Generator and Engine.

SKU 92456 For technical questions, please call 1-800-444-3353. Page 5 GENERATOR USE AND CARE Make sure the Power Switch is in its “OFF” position and disconnect the spark plug wire before making any adjustments, changing accessories, or storing the generator. Such preventive safety measures reduce th...

Page 6 - SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS; INSTALLATION PRECAUTIONS

SKU 92456 For technical questions, please call 1-800-444-3353. Page 6 SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS 1. WARNING! People with pacemakers should consult their physician(s) be- fore using this product. Electromagnetic fields in close proximity to a heart pace-maker could cause interference t...

Page 7 - FIRE AND EXPLOSION PRECAUTIONS

SKU 92456 For technical questions, please call 1-800-444-3353. Page 7 1. Gasoline fuel and fumes are flammable, and potentially explosive. Use proper fuel storage and handling procedures. Always have multiple ABC class fire extin-guishers nearby. 2. Keep the Generator and surrounding area clean at a...

Page 8 - make sure the Power Switch is in its “OFF” position. Disconnect the; CHEMICAL PRECAUTIONS

SKU 92456 For technical questions, please call 1-800-444-3353. Page 8 MECHANICAL PRECAUTIONS 1. ALWAyS make sure the Power Switch is in its “OFF” position. Disconnect the spark plug wire, and allow the Engine to completely cool before carrying out maintenance. 2. Check for damaged parts. Before usin...

Page 9 - If an extension cord (not included) is used, make sure to use only UL; FIGURE A

SKU 92456 For technical questions, please call 1-800-444-3353. Page 9 NOISE PRECAUTIONS 1. Prolonged exposure to noise levels above 85 dBA is hazardous to hearing. Al-ways wear ANSI approved ear protection when operating or working around the Generator when it is running. ELECTRICAL PRECAUTIONS 1. A...

Page 10 - Insulate all connections and disconnected wires.; INSTALLATION; The Generator is quite heavy. Use care and the proper lifting or; GENERAL LOCATION

SKU 92456 For technical questions, please call 1-800-444-3353. Page 10 8. Keep all electrical equipment clean and dry. Replace any wiring where the insu-lation is cracked, cut, abraded or otherwise degraded. Replace terminals that are worn, discolored, or corroded. Keep terminals clean and tight. 9....

Page 11 - Assembly Diagrams; Check to make sure the Engine’s Power Switch (2) is in its; “OFF”; To do so, unscrew and remove the Engine’s Oil Dipstick (65A) located; upper marked line; stick back into the Oil Fill Hole.

SKU 92456 For technical questions, please call 1-800-444-3353. Page 11 5. Place the Generator as close as possible to the electrical tools and equipment being powered to reduce the length of extension cords. 6. If the Generator in located indoors the Engine exhaust must be ventilated to the outdoors...

Page 13 - plugged in to the Generator.; “ON”

SKU 92456 For technical questions, please call 1-800-444-3353. Page 13 3. Before the first use, remove the Fuel Tank Cap (33) and fill the Fuel Tank (30B) with unleaded gasoline. Then, replace the Fuel Tank Cap. Thereafter, check the Engine’s Fuel Gauge (34) for the amount of unleaded gasoline in th...

Page 15 - Powering 120 Volt AC Tools And Equipment:; Powering 12 Volt DC Tools And Equipment:

SKU 92456 For technical questions, please call 1-800-444-3353. Page 15 Powering 120 Volt AC Tools And Equipment: 1. Prior to powering tools and equipment, make sure the Generator’s rated voltage, and amperage capacity (115 VAC / 20 Amps) is adequate to supply all electri- cal loads that the unit wil...

Page 16 - FIGURE H; The Generator features a 10 AMP DC Fuse (9) to protect the DC circuit; Always make sure the Engine Power Switch (2) is in its “OFF” po-; inspect the general condition of the Generator. Check for loose; Do not use damaged equipment.

SKU 92456 For technical questions, please call 1-800-444-3353. Page 16 5. 10 AMP DC FUSE (9) POSITIVE (+) DC TERMINAL (7) NEGATIVE (-) DC TERMINAL (7) FIGURE H When finished using the Generator, turn the Engine Power Switch (2) to its “OFF” position. Turn the Fuel Valve (40B) to its “OFF” position. ...

Page 17 - Follow all maintenance procedures as outlined in the; Engine Maintenance Sched-; check to make sure the Engine’s oil level is adequate. If neces-; Engine Maintenance Schedule; Interval; Details

SKU 92456 For technical questions, please call 1-800-444-3353. Page 17 Follow all maintenance procedures as outlined in the Engine Maintenance Sched- ule below at the specified intervals. In addition, observe the following details: before each use: check to make sure the Engine’s oil level is adequa...

Page 18 - able individually as replacement parts.; PARTS LIST

SKU 92456 For technical questions, please call 1-800-444-3353. Page 18 NOTE: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. PARTS LIST PLEASE READ THE FOLLOWING CAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE ...

Page 19 - ASSEMbLy DIAGRAM

SKU 92456 For technical questions, please call 1-800-444-3353. Page 19 ASSEMbLy DIAGRAM REV 06/06

Page 20 - PARTS LIST - CONTINUED

SKU 92456 For technical questions, please call 1-800-444-3353. Page 20 PARTS LIST - CONTINUED NOTE: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. Part Description Qty. 1A Muffler 1 2A Cylinder Head Bolt 4 3A Cylinder Head C...

Page 21 - ASSEMbLy DIAGRAM - CONTINUED

SKU 92456 For technical questions, please call 1-800-444-3353. Page 21 ASSEMbLy DIAGRAM - CONTINUED 78A 79A 80A 77A 76A 75A 74A 1A 2A 3A 4A 5A 6A 7A 8A 9A 10A 11A 12A 13A 14A 15A 16A 17A 18A 19A 20A 21A 22A 23A 24A 25A 26A 27A 28A 29A 30A 31A 32A 33A 36A 37A 38A 39A 40A 41A 42b 43A 44A 45A 46A 47A 4...

Page 22 - WIRING DIAGRAM

SKU 92456 For technical questions, please call 1-800-444-3353. Page 22 WIRING DIAGRAM

Page 23 - YEAr; Emission Control System Warranty; Defects Warranty Coverage; Owner’s Warranty Responsibilities

SKU 92456 For technical questions, please call 1-800-444-3353. Page 23 California and United States Emission Control Defects Warranty Statement The California Air Resources Board (herein CARB), the United States Environmental Protection Agency (herein EPA), and Harbor Freight Tools ® (herein HFT) ar...