Chicago Electric 90236 - Manual
Chicago Electric 90236 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – PRODUCT SPECIFICATIONS; When unpacking, check to make sure all the parts shown on the; Parts List on page; This product requires oil and fuel to be added before starting.; Fill the engine with the following:; Gal. of unleaded gasoline with no oil added
- Page 3 – GENERAL SAFETY RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA; Keep your work area clean and well lit.
- Page 6 – SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
- Page 7 – Installation Precautions:
- Page 8 – Fire And Explosion Precautions:; Keep the Generator and surrounding area clean at all times.; Mechanical Precautions:; make sure the Power Switch is in its “OFF” position. Disconnect the
- Page 9 – Chemical Precautions:
- Page 10 – If an extension cord (not included) is used, make sure to use only UL; FIGURE A
- Page 11 – INSTALLATION; The Generator weighs 155 pounds. Use care and the proper
- Page 13 – FIGURE C; FIGURE D; OPERATING INSTRUCTIONS; Assembly Diagram; During operation, it may be necessary to refer to the
- Page 14 – To Start The Generator:; It may take more than one pull; NOTE: DO NOT ATTEMPT TO ADJUST; FIGURE E
- Page 15 – Powering Tools And Equipment:; The Generator features; FIGURE H; position to stop the Generator.
- Page 16 – Always make sure the ON/OFF Switch is in its OFF position.; inspect the general condition of the Generator. Check for; Do not use damaged equipment.; check to make sure the Engine’s oil level is adequate.; PLEASE READ THE FOLLOWING CAREFULLY
- Page 17 – PARTS LIST; available individually as replacement parts.; Wiring Diagram
- Page 18 – ASSEMBLY DIAGRAM; Some parts are listed and shown for illustration
GENERATOR
9 HP ROBIN
®
RECOIL START
Model 90236
OPERATING INSTRUCTIONS
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright
©
2003 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
Generators
Generators
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 90236 For technical questions, please call 1-800-444-3353. Page 2 Item Description Electrical Requirements 5400 Watt Surge Power 4600 Watts Max. Output / Continuous Running Output 4000 Watts 20 AMPs @ 120V / 15 AMPs @ 240V 60 Hz Output 120V Dual Outlet: 20 AMP, 3 Prong Grounded 120/240V Outlet: ...
SKU 90236 For technical questions, please call 1-800-444-3353. Page 3 GENERAL SAFETY RULES WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. SAVE THESE INSTRUCTIONS WORK AREA 1. Keep your work area...
SKU 90236 For technical questions, please call 1-800-444-3353. Page 6 2. Use eye and hearing protection. Wear ANSI approved safety impact eye goggles and hearing protection when using this product. ANSI approved safetyimpact eye goggles and hearing protectors are available from Harbor FreightTools. ...
