Chicago Electric 67648 - Manual
Chicago Electric 67648 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – cOntentS; iMpOrtAnt SAFetY
- Page 3 – SAVe thiS MAnuAl; general power tool Safety warnings; The term ′′power tool′′ in the warnings; presence of flammable liquids, gases; Power tools create sparks
- Page 4 – under the influence of drugs, alcohol
- Page 5 – qualified repair person using only; This will; Safety warnings common; and specifications provided with; their RATED SPEED can break and fly; must properly fit the spindle of the
- Page 6 – be capable of stopping flying debris; of stopping flying debris generated by
- Page 7 – Kickback and related warnings; Maintain a firm grip on the power; The operator can control
- Page 8 – and the specific guard designed for
- Page 9 – sanding paper extending beyond the; Safety Warnings Specific for Wire; brush may expand in diameter due to; Vibration Safety; or for an extended period should first; SAVe theSe; grOunding; Check with a qualified electrician
- Page 10 – grounded tools: tools with three; -prong plug and Outlet; double insulated tools: tools with; Outlets for 2-prong plug; double insulation system which satisfies; extension cords; Grounded
- Page 11 – cord or have it repaired by a qualified; Symbology
- Page 12 – SpeciFicAtiOnS; such as lead. The material will quickly fill; unpAcKing; components; inStructiOnS FOr putting
- Page 13 – Assembly; the Wheel Guard to ensure it is firmly
- Page 14 – OperAting inStructiOnS; tool Set up; correct arbor size and must fit; Press in and hold the Spindle Lock
- Page 15 – should rest flat against the Inner Flange.; work piece and work Area Set up; sparks and debris that will fly off the work; general Operating instructions; Grip the tool firmly in both; motor and reduce the efficiency of the
- Page 16 – Procedures not specifically; lubrication; qualified technician for this procedure.; replaced only by a qualified service
- Page 17 – Figure 5; using a flat head screwdriver (Sold; Accessory Storage and handling
- Page 18 – troubleshooting; problem; disconnect power supply before service.
- Page 19 – pleASe reAd the FOllOwing cAreFullY; pArtS liSt
- Page 20 – ASSeMblY diAgrAM; individually as replacement parts.
- Page 21 – liMited 90 dAY wArrAntY; vary from state to state.
7” Angle grinder
Model
67648
Set up And OperAting inStructiOnS
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SAVe thiS MAnuAl.
Copyright
©
2010 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of Harbor
Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements,
actual product may differ slightly from the product described herein.
For technical questions or replacement parts, please call 1-800-444-3353.
(Grinding Wheel Sold Separately)
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 For technical questions, please call 1-800-444-3353. SKU 67648 cOntentS iMpOrtAnt SAFetY inFOrMAtiOn .................................3 generAl pOwer tOOl SAFetY wArningS ........................................... 3 SAFetY wArningS cOMMOn FOr grinding, SAnding, And wirebruShing OperAtiOnS .....
Page 3 For technical questions, please call 1-800-444-3353. SKU 67648 SAVe thiS MAnuAl Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram...
Page 4 For technical questions, please call 1-800-444-3353. SKU 67648 increased risk of electric shock if your body is grounded. do not expose power tools to rain or c. wet conditions. Water entering a power tool will increase the risk of electric shock. do not abuse the cord. never use d. the cord ...
