Chicago Electric 67089 - Manual
Chicago Electric 67089 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SaVe tHiS manual; impOrtant SaFetY; general Safety Warnings
- Page 4 – Specific Safety Warnings
- Page 5 – Vibration Safety
- Page 6 – SaVe tHeSe; SpeciFicatiOnS
- Page 7 – installing a drill Bit; Operating inStructiOnS; Work piece and Work area Set up
- Page 8 – lubrication
- Page 9 – troubleshooting; problem
- Page 10 – pleaSe read tHe FOllOWing careFullY
- Page 11 – aSSemBlY diagram
- Page 12 – limited 90 daY WarrantY
67089
Set up and Operating inStructiOnS
distributed exclusively by Harbor Freight tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS manual.
Copyright
©
2009 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
12V 3/8” litHium-iOn cOrdleSS
drill/driVer
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 67089 For technical questions, please call 1-800-444-3353. Page 2 SaVe tHiS manual Keep this manual for the safety warn- ings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly dia...
SKU 67089 For technical questions, please call 1-800-444-3353. Page 4 power tool use and care 7. do not force the power tool. use a. the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate for which it was designed. do not use the power tool...
SKU 67089 For technical questions, please call 1-800-444-3353. Page 5 Avoid unintentional starting. Prepare 7. to begin work before turning on the tool.Do not lay the tool down until it has 8. come to a complete stop. Moving parts can grab the surface and pull the tool out of your control.When using...
