Chicago Electric 66603 - Manual
Chicago Electric 66603 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – spEcIFIcATIoNs; the Engine without oil WILL ruin the Engine and void the warranty.; sAvE ThIs MANUAl; place for future reference.
- Page 3 – GENERAl sAFETY RUlEs; READ AND UNDERsTAND All INsTRUcTIoNs; woRK AREA; Keep your work area clean and well lit.; pERsoNAl sAFETY; Do not overreach. Keep proper footing and balance at all times.; Tool Use And care; Do not force the tool. Use the correct tool for your application.
- Page 4 – utility company or a qualified electrician.; for electrical shock.; Ac Applications
- Page 5 – sERvIcE; instructions in the; spEcIFIc sAFETY RUlEs; Maintain labels and nameplates on the Generator.
- Page 6 – ToXIc FUMEs, FIRE, AND EXplosIoN pREcAUTIoNs; This Generator is designed for outdoor use only. Do not operate the
- Page 7 – MEchANIcAl pREcAUTIoNs; make sure the Engine Switch is in its “OFF” position.; Allow the Engine to; chEMIcAl pREcAUTIoNs; If; NoIsE pREcAUTIoN; prolonged exposure to high noise levels is hazardous to hearing.; Always; ElEcTRIcAl pREcAUTIoNs; codes and standards before operation.
- Page 8 – REcoMMENDED MINIMUM wIRE GAUGE FoR EXTENsIoN coRDs*
- Page 9 – UNpAcKING; al as soon as possible.; coNTRol pANEl FEATUREs; Used to start and stop the Engine. To start, insert the Engine; “START”; position. Then immediately; “OFF”; The Generator features three Outlet Sockets with
- Page 10 – bATTERY INsTAllATIoN; wide
- Page 11 – FIGURE b; To ATTAch ThE whEEl AssEMblY; Generator about 6 to 8 inches off the floor surface.; INsTAllATIoN INsTRUcTIoNs
- Page 12 – ground the Generator.; pRE-sTART INsTRUcTIoNs; Engine’s crankcase prior to its first use.; Before each use, check the oil level.; weight
- Page 13 – ThIs GENERAToR hAs AN AUTo-shUTDowN oIl sENsoR. IF ENGINE sTops; Fuel Tank with
- Page 14 – Allow the Generator to run at no load for five minutes after each
- Page 15 – To coNNEcT ElEcTRIcAl loADs; void
- Page 16 – Always make sure the Engine Switch (2) is in its ‘OFF” position and; GENERAToR MAINTENANcE; Keep the Generator clean and dry at all times.; ENGINE MAINTENANcE; After the first 5 to 8 hours of use:; Change the oil. Then, change the oil every 50 hours; FIGURE G
- Page 17 – Service the Air Cleaner Element (19A) and Air Cleaner; After every 100 hours of use:; FIGURE h
- Page 18 – Measure the electrode gap with a suitable gauge. The gap should be; when storing the Generator for extended periods:; Before storing, drain all fuel out; Then make; plEAsE READ ThE FollowING
- Page 19 – TRoUblEshooTING
- Page 20 – pARTs lIsT - GENERAToR; part
- Page 21 – AssEMblY DIAGRAM - GENERAToR
- Page 23 – available individually as replacement parts.; Record
- Page 24 – AssEMblY DIAGRAM -ENGINE
- Page 25 – wIRING DIAGRAM
- Page 26 – lIMITED 1 YEAR / 90 DAY wARRANTY; OTHER WARRANTIES, ExPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF
- Page 27 – EMIssIoN coNTRol sYsTEM wARRANTY; United states Emission control Defects warranty statement
6500 RATED wATTs/7000 MAXIMUM wATTs
poRTAblE GENERAToR
66603
sET Up, opERATING, AND sERvIcING INsTRUcTIoNs
DANGER
Using a generator indoors cAN KIll YoU IN MINUTEs.
Generator exhaust contains carbon monoxide. This is
a poison you cannot see or smell.
NEvER use inside a home
or garage, EvEN IF doors
and windows are open.
only use oUTsIDE and
far away from windows,
doors, and vents.
visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
sAvE ThIs MANUAl.
Copyright
©
2007 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 10e
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 66603 For technical questions, please call 1-800-444-3353. spEcIFIcATIoNs Electrical Requirements 6500 Rated Watts (Rated) / 7000 Maximum Watts (Maximum) / 60 Hz / 3600 RPM output Receptacles: 2 NEMA 120V, Household Receptacles, with a 20 A Circuit Breaker 1 NEMA 120V, 3-Prong Twist Lock ...
Page 3 SKU 66603 For technical questions, please call 1-800-444-3353. GENERAl sAFETY RUlEs wARNING! READ AND UNDERsTAND All INsTRUcTIoNs Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. sAvE ThEsE INsTRUcTIoNs woRK AREA Keep your work area cl...
Page 4 SKU 66603 For technical questions, please call 1-800-444-3353. Do not use the power tool if the Engine switch does not turn it on or off. 2. Any tool that cannot be controlled with the Engine Switch is dangerous and must be replaced. Disconnect the spark plug wire from the Engine before makin...
