Chicago Electric 66508 - Manual
Chicago Electric 66508 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Work Area; plugs. Check with a qualified electri
- Page 3 – Personal Safety; tool while tired or under the influence; Tool Use and Care
- Page 4 – Service; unqualified personnel could result in a; SPECIFIC SAFETY RULES; a power tool in areas near flammable
- Page 5 – GROUNDING; Grounded Tools: Tools with Three
- Page 6 – satisfies OSHA requirements and com; Ground Fault Circuit Interrupter; Switch is in the Off position before plug; ExTENSION CORDS; Grounded
- Page 7 – qualified electrician before using it.; Symbology; UNPACKING
- Page 8 – OPERATING INSTRUCTIONS; Operational Components and Controls; Motor
- Page 9 – Select and Attach Proper Cutting Tool; Cutter Tool
- Page 10 – Drain Cleaning Operation; DO NOT USE THIS DRAIN CLEANER ON DRAIN LINES SMALLER THAN; Do not
- Page 11 – OPERATING TIPS; TROUBLESHOOTING; Problem
- Page 12 – qualified technician Re
- Page 13 – Make sure the Power Switch of the Drain Cleaner is in its “OFF”; General; Do not use; Periodically recheck all nuts, bolts, and screws for tightness.; Auto Feed Maintenance; Flushing with water,; If disassembly is required, proceed
- Page 14 – PLEASE READ THE FOLLOWING CAREFULLY; Guide Roller Replacement; need replacement. Replace all three Guide Rollers at the same time.; Tangled Cable; the Cable during use, let the cutter tool do the work.; Removing a Stuck Cable in the Drain Pipe; cause the Cable to tangle in the Drum.
- Page 15 – MAIN UNIT PARTS LIST
- Page 16 – MAIN UNIT ASSEMBLY DRAWING
- Page 17 – 4-4A Axle for Guide Roller
- Page 18 – LIMITED 90 DAY WARRANTY; vary from state to state.
50 FT. DRAIN CLEANER
WITH POWER FEED
66508
ASSEMBLY AND OPERATING INSTRUCTIONS
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
©
2008 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork contained
herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may
differ slightly from the product described herein. Tools required for assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 09b, 09k
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 66508 For technical questions, please call 1-800-444-3353 SPECIFICATIONS Electric Motor 1/3 HP 1785 RPM Power Cord #16 AWG X 3C, 6’4” long Power Input 120 V~ / 60 Hz / 4.7 A (running) Cable Type Spring Steel with Coupler End 50’ L x ½” Cable Diameter (0.123” Wire Diameter) Pipe Compatibil...
Page 3 SKU 66508 For technical questions, please call 1-800-444-3353 eliminates the need for the three wire grounded power cord and grounded power supply system. Do not abuse the Power Cord. 5. Never use the Power Cord to carry the tools or pull the Plug from an outlet. Keep the Power Cord away from...
Page 4 SKU 66508 For technical questions, please call 1-800-444-3353 Service Tool service must be performed 7. only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury. When servicing a tool, use only 8. identical replacement part...
