Chicago Electric 46944 - Manual
Chicago Electric 46944 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 6 – Table 1; Notes: * Charge Rates for this model are listed on the front panel.; Output Selector Controls; Voltmeter
- Page 7 – Engine Start; Set the charge rate and timer to the off positions.; Troubleshooting; Ammeter display reads maximum.
- Page 8 – NOTE; PLEASE READ THE FOLLOWING CAREFULLY; Note: There are no replacement parts available with this Charger.
- Page 9 – LIMITED 90 DAY WARRANTY; vary from state to state.
CHARGER / ENGINE
STARTER, 6/12V
ASSEMBLY and OPERATING INSTRUCTIONS
Model 46944
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SaVe THiS manual.
Copyright
©
2002 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual
or any artwork contained herein may be reproduced in any shape or form without the
express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 6 SKU 46944 Table 1 Notes: * Charge Rates for this model are listed on the front panel. ** Based on battery at 50% charge. AH = Ampere HoursNR = Not RecommendedCCA = Cold Cranking AmpsRC = Reserve Capacity Warning!! This Charger Engine Starter is not automatic and can overcharge and dry up a ba...
Page 7 SKU 46944 Engine Start 1. Set the charge rate and timer to the off positions. 2. With the Charger unplugged from the AC outlet, connect the Charger to the battery. 3. Plug the Charger AC power cord into the AC outlet, then move OFF to HOLD position. 4. Set the charge rate to the engine start ...
Page 8 SKU 46944 NOTE : Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE ...
