Chicago Electric 42802 - Manual
Chicago Electric 42802 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; Save This Manual; SAFETY WARNINGS AND; in the presence of flammable gases
- Page 3 – fluence of alcohol or drugs
- Page 4 – The powder dust is flammable; - Verify that there are no flames or; Avoid electrical shock!; unpacking
- Page 5 – PREPARATION; - no flame or ignition source; with; OPERATION; MAIN COMPONENTS
- Page 6 – der flow. The Pedal Switch controls
- Page 7 – When finished spraying:; ducting Pole before touching or; a smooth, gloss finish all over the; Process Tips
- Page 8 – MAINTENANCE; any possible ignition source in the; PARTS lIST; Item
- Page 10 – lIMITED 90 DAY WARRANTY; WARRANTIES OF MERCHANTABILITY AND FITNESS.
POWDER COATING SYSTEM
42802
SET uP AND OPERATING INSTRuCTIONS
Distributed exclusively by Harbor Freight Tools
®
.
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANuAl.
Copyright
©
2000 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or any artwork
contained herein may be reproduced in any shape or form without the express written consent of
Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein. Tools required for
assembly and service may not be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Manual Revised 09d
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 42802 For technical questions, please call 1-800-444-3353. Page 2 SPECIFICATIONS Power Consumption 120 V~, 60 Hz Air Supply 20 to 40 PSI, dry air Air Inlet 1/4 inch NPT thread Power Cord 16 AWG Note: Performance of this tool may vary depending on variations in local line voltage. Extension cord ...
SKU 42802 For technical questions, please call 1-800-444-3353. Page 3 Maintain tools with care 10. . Keep tools sharp and clean for better and safer performance. Follow instruc- tions for lubricating and changing accessories. Inspect tool cords peri- odically and, if damaged, have them repaired by a...
SKU 42802 For technical questions, please call 1-800-444-3353. Page 4 product, but must be supplied by the operator. Additional Safety Warnings for the Powder Coating System The powder dust is flammable 1. when floating in the air . - Ventilate the area well. - Verify that there are no flames or ign...
