Chicago Electric 42802 - Manuals

Page 2 - SPECIFICATIONS; Save This Manual; SAFETY WARNINGS AND; in the presence of flammable gases

SKU 42802 For technical questions, please call 1-800-444-3353. Page 2 SPECIFICATIONS Power Consumption 120 V~, 60 Hz Air Supply 20 to 40 PSI, dry air Air Inlet 1/4 inch NPT thread Power Cord 16 AWG Note: Performance of this tool may vary depending on variations in local line voltage. Extension cord ...

Page 3 - fluence of alcohol or drugs

SKU 42802 For technical questions, please call 1-800-444-3353. Page 3 Maintain tools with care 10. . Keep tools sharp and clean for better and safer performance. Follow instruc- tions for lubricating and changing accessories. Inspect tool cords peri- odically and, if damaged, have them repaired by a...

Page 4 - The powder dust is flammable; - Verify that there are no flames or; Avoid electrical shock!; unpacking

SKU 42802 For technical questions, please call 1-800-444-3353. Page 4 product, but must be supplied by the operator. Additional Safety Warnings for the Powder Coating System The powder dust is flammable 1. when floating in the air . - Ventilate the area well. - Verify that there are no flames or ign...

Page 5 - PREPARATION; - no flame or ignition source; with; OPERATION; MAIN COMPONENTS

SKU 42802 For technical questions, please call 1-800-444-3353. Page 5 PREPARATION Setup an air supply with an air pres- 1. sure regulator and moisture trap (do not use an inline air oiler). The air compressor must provide an air pres- sure of 20 to 40 PSI.Select a safe location for spraying 2. and c...

Page 6 - der flow. The Pedal Switch controls

SKU 42802 For technical questions, please call 1-800-444-3353. Page 6 Trigger (7) Pressure Reducer Valve (18) Cup (4) Scatter Tip (12) Regulating Screw (14) 3. Unscrew the Cup (4) from the Spray Gun (2) and fill with up to two inches of coating powder (not supplied). - Turn the Cup upside down and p...

Page 7 - When finished spraying:; ducting Pole before touching or; a smooth, gloss finish all over the; Process Tips

SKU 42802 For technical questions, please call 1-800-444-3353. Page 7 - When completed, the object should be completely coated with a dull, opaque coat of powder. When finished spraying: 10. - remove your foot from the Pedal Switch (11), - press the Control Box Power Switch (17) to the OFF position,...

Page 8 - MAINTENANCE; any possible ignition source in the; PARTS lIST; Item

SKU 42802 For technical questions, please call 1-800-444-3353. Page 8 MAINTENANCE Wear disposable vinyl gloves. 1. Unplug the Control Box line cord from 2. the electrical outlet.Discharge the Conducting Pole (9) to 3. the Ground Clip (10).Disconnect the air hose from the 4. Spray Gun.Remove the Cup ...

Page 10 - lIMITED 90 DAY WARRANTY; WARRANTIES OF MERCHANTABILITY AND FITNESS.

SKU 42802 For technical questions, please call 1-800-444-3353. Page 10 lIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this prod- uct is free from defects in materi...