Chicago Electric 41903 - Manual
Chicago Electric 41903 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Technical Specifications; Action; The Operator; Protective gloves and nonskid footwear is recommended.; Lead from lead-based paints
- Page 4 – Charging the Battery Pack; Plug the Quick Charger into a wall socket.; Assembly
- Page 6 – Securely clamp the work piece to be cut to the workbench.; Operation; With the Saw at full speed, move it slowly forward to start the cut.
- Page 7 – Maintenance; and debris from accumulating in the working area.
- Page 8 – Unpacking; Description
6-1/2” (18V)
41903
ASSEMBLY & OPERATING INSTRUCTIONS
CIRCULAR SAW
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
Copyright
©
1999 by Harbor Freight Tools
®
. All rights reserved. No portion of this manual or
any artwork contained herein may be reproduced in any shape or form without the express
written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
®
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
SKU 41903 Page 2 For technical questions, please call 1-800-444-3353. THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete theowner’s record below: Model______________ Serial No.____________ Purchase Date__________ SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCT...
SKU 41903 Page 4 For technical questions, please call 1-800-444-3353. Charging the Battery Pack The Battery Pack (par t #14) does not come charged from the factory. Charge it before using. Step 1) Inser t the Battery Pack (#14) into the Quick Charger. The Battery Pack will onlyfit in one way. Step 2...
SKU 41903 Page 6 For technical questions, please call 1-800-444-3353. Adjusting the Saw Prior to Cutting Step 1) To adjust the angle of the Saw Blade up to 50° loosen the Bevel AdjustmentKnob (part #50) and move the Shoe (part #53) down paying attention to thedegrees indicated on the angle scale (Se...
