Chicago Electric 41695 - Manual
Chicago Electric 41695 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Specifications; Accessories listed on page 6 on the parts list.; Save This Manual; Read all instructions before using this tool!; Tool Speed
- Page 4 – Do not grind or sand near flammable materials.; Unpacking
- Page 5 – Operation; Cutters are used for cutting, carving and slotting materials.
- Page 6 – Clean the collet shaft of any dirt or debris.
- Page 7 – Assembly Drawing
ROTARY TOOL KIT
WITH 60 ACCESSORIES
ASSEMBLY AND OPERATING
INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at http://www.harborfreight.com
For technical questions and replacement parts, please call 1-800-444-3353.
Model 41695
®
Copyright
©
2002 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Harbor Freight Tools.
REV 05/05
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 41695 For technical questions, please call 1-800-444-3353. Specifications Accessories listed on page 6 on the parts list. Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions,operating and maintenance procedures, parts list and diagram. ...
Page 4 SKU 41695 For technical questions, please call 1-800-444-3353. WARNING: Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities, contain chemicals known [to the State of California] to causecancer, birth defects or other reproductive harm. Some example...
Page 5 SKU 41695 For technical questions, please call 1-800-444-3353. Operation Note: Always disconnect the tool from the power adapter while loading, unloading, or adjust-ing accessories. 1. Choose the appropriate Collet (3) for the shank of the accessory you are using. 2. Just above the collet sha...
