Chicago Electric 38941 - Manual
Chicago Electric 38941 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – SPECIFICATIONS; Save This Manual; place for future reference.; Wet Cut Attachment; attachment is not included with the Dry Tile Saw.; GENERAL SAFETY RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA
- Page 3 – chips and sparks. Provide barriers or shields as needed.; ELECTRICAL SAFETY; increase the risk of electric shock.; PERSONAL SAFETY; in serious personal injury.
- Page 4 – maintenance on this tool.; TOOL USE AND CARE; and may lead to loss of control.; SERVICE
- Page 5 – SPECIFIC SAFETY RULES; space. Do not use this product in a damp or wet location.; Always keep the extension cord away from moving parts on the tool.; safety measure because it prevents a sustained electrical shock.
- Page 6 – GROUNDING; Outlets for 2-Prong Plug; DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS; ample, a 14 gauge cord can carry a higher current than a 16 gauge cord.
- Page 7 – RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*; NAMEPLATE; TABLE A; SYMBOLOGY; cord usage may also affect tool performance.; UNPACKING
- Page 8 – MAINTENANCE; back in the Brush Cap and tighten.; OPERATION; Installing and Removing the Cutting Blade; the tool is OFF and unplugged.; Using the Saw; switch to start the saw.
- Page 9 – PARTS LIST; PLEASE READ THE FOLLOWING CAREFULLY
- Page 10 – Record Product’s Serial Number Here:; vidually as replacement parts.
- Page 11 – (Please order separately- not included with the 4” Dry Tile Saw); screw and rubber connector; Assembly Instructions; Attach the Water Plug to the Water Tube (52) using the screw.; Water Plug
- Page 12 – Gravity Feed Instructions
- Page 13 – 0 Day Warranty
4’’ DRY TILE SAW
Model
38941
ASSEMBLY AND OPERATION INSTRUCTIONS
Due to continuing improvements, actual product may differ slightly from the product described herein.
Distributed Exclusively by Harbor Freight Tools
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND
ALL WARNINGS AND INSTRUCTIONS BEFORE USE.
Copyright
©
1998, 2006 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form without
the express written consent of Harbor Freight Tools.
For technical questions or replacement parts, please call 1-800-444-3353.
Diamond Blade not included; sold separately.
REV 09e
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 38941 For technical questions, please call 1-800-444-3353. SPECIFICATIONS Motor 110 V~, 3.2 A (No Load) RPM 10,525 Cutting Capacity 1-3/8” Blade (sold separately) 4” Diameter x 5/8” Arbor Overall Dimensions 9” x 7” x 7-3/4” Overall Weight 7.6 lb. Motor is double insulated The Tile Saw com...
Page 3 SKU 38941 For technical questions, please call 1-800-444-3353. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away wh...
Page 4 SKU 38941 For technical questions, please call 1-800-444-3353. 5. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. 6. Use safety equipment. Always wear eye protection. Dust mask, nonsk...
