Chicago Electric 38941 - Manuals

Page 2 - SPECIFICATIONS; Save This Manual; place for future reference.; Wet Cut Attachment; attachment is not included with the Dry Tile Saw.; GENERAL SAFETY RULES; READ AND UNDERSTAND ALL INSTRUCTIONS; WORK AREA

Page 2 SKU 38941 For technical questions, please call 1-800-444-3353. SPECIFICATIONS Motor 110 V~, 3.2 A (No Load) RPM 10,525 Cutting Capacity 1-3/8” Blade (sold separately) 4” Diameter x 5/8” Arbor Overall Dimensions 9” x 7” x 7-3/4” Overall Weight 7.6 lb. Motor is double insulated The Tile Saw com...

Page 3 - chips and sparks. Provide barriers or shields as needed.; ELECTRICAL SAFETY; increase the risk of electric shock.; PERSONAL SAFETY; in serious personal injury.

Page 3 SKU 38941 For technical questions, please call 1-800-444-3353. 2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. 3. Keep bystanders, children, and visitors away wh...

Page 4 - maintenance on this tool.; TOOL USE AND CARE; and may lead to loss of control.; SERVICE

Page 4 SKU 38941 For technical questions, please call 1-800-444-3353. 5. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the power tool in unexpected situations. 6. Use safety equipment. Always wear eye protection. Dust mask, nonsk...

Page 5 - SPECIFIC SAFETY RULES; space. Do not use this product in a damp or wet location.; Always keep the extension cord away from moving parts on the tool.; safety measure because it prevents a sustained electrical shock.

Page 5 SKU 38941 For technical questions, please call 1-800-444-3353. SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the tool. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 2. Maintain a safe working environment. Make sure th...

Page 6 - GROUNDING; Outlets for 2-Prong Plug; DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS; ample, a 14 gauge cord can carry a higher current than a 16 gauge cord.

Page 6 SKU 38941 For technical questions, please call 1-800-444-3353. GROUNDING Outlets for 2-Prong Plug DOUBLE INSULATED TOOLS: TOOLS WITH TWO PRONG PLUGS 1. Tools marked “Double Insulated” do not require grounding. They have a special double insulation system which satisfies OSHA requirements and ...

Page 7 - RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS*; NAMEPLATE; TABLE A; SYMBOLOGY; cord usage may also affect tool performance.; UNPACKING

Page 7 SKU 38941 For technical questions, please call 1-800-444-3353. 8. Protect your extension cords from sharp objects, excessive heat, and damp or wet ar- eas. RECOMMENDED MINIMUM WIRE GAUGE FOR EXTENSION CORDS* (120 OR 240 VOLT) NAMEPLATE AMPERES (at full load) EXTENSION CORD LENGTH 25 Feet 50 F...

Page 8 - MAINTENANCE; back in the Brush Cap and tighten.; OPERATION; Installing and Removing the Cutting Blade; the tool is OFF and unplugged.; Using the Saw; switch to start the saw.

Page 8 SKU 38941 For technical questions, please call 1-800-444-3353. MAINTENANCE 1. Always keep the Saw clean. The ventilation passage should be kept clean and free from obstructions. 2. Replacing Carbon Brushes:a. Replace the Carbon Brushes when they wear down to about 3/16” or sparking will oc- c...

Page 9 - PARTS LIST; PLEASE READ THE FOLLOWING CAREFULLY

Page 9 SKU 38941 For technical questions, please call 1-800-444-3353. PARTS LIST Part Description Quantity 1 Hex Bolt 1 2 Outside Flange 1 3 Inside Flange 1 4 Screw M4 x 8 3 5 Elastic Washer 4 3 6 Bearing Cover 1 7 O Sealing Ring 1 8 Spindle 1 9 Woodruff Key 3 x 13 1 10 Bearing 1 11 Elastic Distance...

Page 10 - Record Product’s Serial Number Here:; vidually as replacement parts.

Page 10 SKU 38941 For technical questions, please call 1-800-444-3353. Record Product’s Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available indi- vidually as ...

Page 11 - (Please order separately- not included with the 4” Dry Tile Saw); screw and rubber connector; Assembly Instructions; Attach the Water Plug to the Water Tube (52) using the screw.; Water Plug

Page 11 SKU 38941 For technical questions, please call 1-800-444-3353. WET CUT ATTACHMENT (38942) (Please order separately- not included with the 4” Dry Tile Saw) The Wet Cut Attachment includes a 1/4” I.D. x 9.5 foot vinyl hose, water plug with screw and rubber connector Assembly Instructions Note:...

Page 12 - Gravity Feed Instructions

Page 12 SKU 38941 For technical questions, please call 1-800-444-3353. Warning: When using the Wet Cutting Attachment, extreme care must be taken to insure that the saw’s electrical cord is positioned to remain dry and free from the water hose at all times. The operator must be aware that an extreme...

Page 13 - 0 Day Warranty

Page 13 SKU 38941 For technical questions, please call 1-800-444-3353. 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from de- fects in materials and ...