Chicago Electric 38391 - Manual
Chicago Electric 38391 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Read all instructions before using this tool!; Battery Type
- Page 4 – Operation; To use the Jumpstarter System to start your vehicle:; safety switch on the jumpstarter is in the OFF position.
- Page 5 – To use your Jump Start System to power appliances:; Turn the Safety Switch to the ON position to energize clamps and; Recharging
- Page 8 – Assembly Drawing
JUMPSTARTER SYSTEM
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Copyright © 2000 by Harbor Freight Tools. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353
38391
Distributed exclusively by
Harbor Freight Tools
®
.
Revised 08/05; 04/06
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Page 2 SKU 38391 For technical questions, please call 1-800-444-3353. Specifications Save This Manual You will need the manual for the safety warnings and precautions, assembly instructions, operating and maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the i...
Page 4 SKU 38391 For technical questions, please call 1-800-444-3353. damaged should be carefully checked to determine that it will operate properly and perform its intended function. Do not use the tool if any switch does not turn On and Off properly. 22. Replacement parts and accessories. When ser...
Page 5 SKU 38391 For technical questions, please call 1-800-444-3353. 8. When the engine is running, turn the safety switch to OFF, disconnect the black clamp first, and return the cable to its stored position on the jumpstarter system. 9. Disconnect the red clamp and return the cable to its positio...
