Winegard VS-0503 - Manuals

Winegard VS-0503 – Manual in PDF format online.

Manuals:

Manual Winegard VS-0503

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Figure A

COAX CABLE CONNECTIONS STEP 1. Connect the coax cable from the output on the switch box marked “To Main TV” to the antenna input connection on the back of the main TV. STEP 2. Connect the coax cable from the output on the switch box marked “To TV 2” to the antenna input connection on the back of the...

Page 3 - not; RECORDING

OPERATION Once all the connections have been properly made to the control box, you are ready to watch your favorite programming. USING THE BUTTONS ON THE FRONT OF THE CONTROL BOX VIEWING STEP 1. To view signals from an amplified TV Antenna, first press the TV Antenna POWER button to the ON position....

Page 4 - TROUBLESHOOTING; the control box. Check to make sure all connections are correct.; location. If picture quality is degraded and you are; INSTALLING COAX CONNECTORS; Trim braid close to outer cover and remove 1⁄4” of inner insulation.; Be careful not to nick center conductor and make

TROUBLESHOOTING If the unit doesn’t switch properly between inputs, ( TVs, VCR, SAT, CABLE, etc.), be sure the coax is connected to the proper jacks on the back of the control box. Make sure the center conductors of the coax cables are not bent and are making good contact. See “Installing Coax Conne...

Winegard Manuals