Winegard MP1 - Manual
Winegard MP1 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – ) Wiring the Carryout MP1; ) Setting Up the Carryout MP1; ) Finding the Azimuth and Elevation; STOP; ) Pointing the Carryout MP1
- Page 3 – DIsh receiver setup; You are now ready to watch TV!; Check out online receiver setup guides for your antenna at; TIP; BeGIn here
- Page 4 – DIrectV receiver setup
- Page 5 – accessories; additional Information; compatibility and programming, visit
User Guide
For Help, Call 1-800-788-4417.
For Receivers and Programming,
Call 1-866-609-9374.
For up-to-date information on receiver
compatibility and programming, visit
www.winegard.com/receivers.
Do not return antenna to place of purchase.
Identifying Carryout MP1 Parts
Azimuth Lock Knob
threads through center of top portion
and base to prevent left to right
movement - stores inside base
Twist On/Off
Cap
fill top portion
with water or sand
for increased stability
25’ Coax Cable
allows optimal antenna
placement and stores
in base for easy stowing
Durable Case
protects dish while not in
use and functions as mount
during use
Bubble Level
helps to check antenna is
level for easy set up
Compass
ensures antenna is pointed to
correct southern setting
Elevation Markings
and Knobs
assist in elevating and locking
antenna at exact angle
LNB
captures the signal
DO NOT PULL ON LNB!
Tie Downs
provide place to secure the base
with stakes
(not provided)
Locking Clips
tightly locks the two halves
together for storage
Dish Notch
provides place to safely
lift dish for setup
Reflector
collects the signal
U.S. Patent
Pending
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2) Wiring the Carryout MP1 Loosen the Elevation Adjustment Knobs and raise the reflector up enough to access the coaxial cable. Do not lift from the LNB, use the notch on the edge of the reflector near the handle to lift the reflector. The Coaxial Cable needs to run DIRECTLY to the Satellite In port...
Once accurately pointed, the signal meter will turn green and show Signal Strength. You will want to make very small adjustments to get the signal as high as possible . If the bar is RED, you may be pointed at the wrong satellite. Check that the satellite shown is the desired satellite. If the bar i...
Check out online receiver setup guides for your antenna at www.winegard.com/receivers/setupguide.php. For Help, Call 1-800-788-4417. DIrectV receiver setup In your receiver Menu, you will need to identiy the Satellite Menu. The Satellite Menu will have an option for Satellite Setup . It may require ...
