Winegard HDA-200 - Manual
Winegard HDA-200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
®
Ultra Low Noise
Distribution Amplifiers
HDA-100
15 dB Gain
54-1000 MHz
-2 dB 2-Way Bi-pass
HDA-200
24 dB Gain
54-1000 MHz
Variable gain Control 0-18 dB
Switchable FM trap
+12 dB gain on 2-Way Bi-pass
Winegard’s new HDA series of Distribution Amplifiers was
designed to meet the market demand for a heavy duty,
quality built, cost effective solution for the amplification and
distribution of analog/digital broadcast signals from Off-Air
and cable TV stations. Both the HDA-100 & HDA-200 are
housed in an industrial grade, weather resistant enclosure.
Each unit has an RF input, amplified RF output, and DC
power insertion jack. Each amplifier also provides a 5-42
MHz 2-way bi-pass.
The Winegard HDA-100 is a single RF input, 15dB gain,
single RF output, with a 5-42 MHz 2-way bi-pass at -2 dB
loss.
The HDA-200 has a single RF input, 24 dB gain, single RF
output, with a 5-42 MHz 2-way bi-pass at +12 dB gain. The
HDA-200 has 0-18 dB gain control and 20 dB “switchable”
FM trap to eliminate those offending FM radio stations.
These features, when combined with the 12 dB of amplified
gain for the 2 way 5-42 MHz return path make the HDA-
200 a superior solution for the “Techno” savvy consumer.
See reverse side for typical power installations.
HDA-100 SPECIFICATIONS
HDA-100
Bandpass Forward ............................... 54-1000 MHz
Bandpass Reverse ............................... 5-42 MHz
Max Output per Channel (80 ch CATV) ..... +25 dBmV (Note 1)*
Max Output per Channel (16 ch off-air) ...... +40 dBmV (Note 2)**
Max Input per Channel (80 ch CATV) ........ +10 dBmV (Note 1)*
Max Input per Channel (16 ch off-air) ......... +25 dBmV (Note 2)**
Max Input Reverse Amp ....................... n/a
Gain ....................................................... 15 dB
Gain Control .......................................... n/a
Reverse Gain ........................................ -2 dB
Noise Figure .......................................... 3 dB
FM Trap ................................................. n/a
Operating Temp .................................... -30° to 140° F
Power Supply Voltage .......................... 12VDC - 200 mA
Housing Dimensions ............................. 4.90” W x 3.92” H x 1.5” D
Weight ................................................... 0.6 lbs.
HDA-200 SPECIFICATIONS
HDA-200
Bandpass Forward ............................. 54-1000 MHz
Bandpass Reverse ............................. 5-42 MHz
Max Output per Channel (80 ch CATV) ... +25 dBmV (Note 1)*
Max Output per Channel (16 ch off-air) .... +40 dBmV (Note 2)**
Max Input per Channel (80 ch CATV) ...... +8 dBmV (Note 1)*
Max Input per Channel (16 ch off-air) ....... +23 dBmV (Note 2)**
Max Input Reverse Amp ....................... +23 dBmV (at 1dB comp)
Gain ..................................................... 24 dB
Gain Control ........................................ 0-18 dB
Reverse Gain ...................................... +12 dB
Noise Figure ........................................ 4.5 dB (at max gain)
FM Trap ............................................... -20 dB (95-108 MHz)
Operating Temp .................................. -30° to 140° F
Power Supply Voltage ........................ 12VDC - 200 mA
Housing Dimensions ........................... 4.90” W x 3.92” H x 1.5” D
Weight ................................................. 0.6 lbs.
*Note (1
) at -62dB ctb, -56dB cso
**Note (2)
at -46dB cross modulation
Power
Jack
RF
Input
RF
Output
Power
Jack
RF
Input
RF
Output
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
