Winegard RMFLDM4 - Manual
Winegard RMFLDM4 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Tuning Antenna; Replacement Parts; Operation
- Page 3 – Supplies Needed; Winegard’s Digital Elevation Sensor has been; Figure 3; If Antenna Does Not Rotate or Is Difficult to Rotate; LCD DISPLAY CODES; Troubleshooting
- Page 5 – POINT TO; cutting the directional handle.; Cutting Shaft Length
- Page 6 – Parts List; Digital Elevation Sensor Interior Wall plate
- Page 9 – Specifications
RV DIGITAL SATELLITE ANTENNA
with Digital Elevation Sensor
Model RM-DM46
may also be packaged as
RM-DM00, RMDM04, RMFLDM4
Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601 • 800-288-8094 • Fax 319-754-0787
www.winegard.com • Printed in U.S.A. ©2002 Winegard Company Rev7 11/11 2451069
www.winegard.com
For Technical Services, call 1-800-788-4417
For Receivers and Programming, call 1-866-609-9374
DO NOT RETURN ANTENNA TO PLACE OF PURCHASE.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 2 STEP 1. The more accurately you determine North, the easier it is to locate the satellite. Step outside and away from your vehicle. (Standing too near to your vehicle can give incorrect compass readings.) It is helpful if there is a landmark on the horizon to represent North. Return to the vehic...
5 4 Supplies Needed Screwdrivers (Phillips and slot) 1-3/4” hole saw 7/16” wrench ABS glue Drill with 1/8” bit Tape measure Non-hardening sealant (Check manufacturer’s specifications for compatibility with your roof.) Winegard’s Digital Elevation Sensor has been INSTALLED and CALIBRATED at the facto...
9 8 CAUTION!After initial installation, the antenna SHOULD ROTATE APPROXIMATELY 360° FROM TRAVEL POSITION. The pointer on the directional handle should point towards the RED SCREW ON THE ROTATION CLAMP when in the TRAVEL POSITION. Figure 15 Figure 16 300 310 320 330 340 350 50 20 30 40 POINT NOR TH ...
