Winegard TR-6018 - Manuals
Winegard TR-6018 – Manual in PDF format online.
Manuals:
Manual Winegard TR-6018
Summary
1/4-20 x 5/8” carriage bolt (4) through the feed arm of the back-up/feed support assy. 1/4-20 hex nut (4) of the reflector with the four holes on the back- up/feed support assy. bolts through the four holes on the front of the reflector. Thread a 1/4-20 hex nut onto each bolt. Parts Assembling the H...
Elevation Loosen the elevation bolts on either side of the back-up/feed support assy. Raise the dish to the specified elevation angle that you found in step 8 of the receiver setup. The red line on the back-up/feed support assy., shown next to the elevation bolt, should line up with the correct angl...
Elevation Loosen the elevation bolts on either side of the back-up/feed support assy. Raise the dish to the specified elevation angle that you found in step 8 of the receiver setup. The red line on the back-up/feed support assy., shown next to the elevation bolt, should line up with the correct angl...