Transition Networks TX12 - Manuals

Page 2 - StackMasterTM TX12; FCC Regulations; 00BASE-TX Cable and Connector Specifications; Maximum Cable Distance:

StackMaster™ TX12 100BASE-TX 12-Port Stackable Hub 16 CAUTION: RJ connectors are NOT INTENDED FORCONNECTION TO THE PUBLIC TELEPHONENETWORK. Failure to observe this caution could resultin damage to the public telephone network. Compliance InformationUL Listed C-UL Listed (Canada)CISPR/EN55022 Class A...

Page 3 - Table of Contents; WARRANTY STATEMENT; CABLE SPECIFICATIONS; 00BASE-FX Cable and Connector Specifications; 00BASE-FX CABLE SPECIFICATIONS; SC connectors are available.

Table of Contents 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . 1 The StackMaster TX12 Hub . . . . . . . . . . . . . . . . . . . . . . . . . .1 StackMaster TX12 Hub Features . . . . . . . . . . . . . . . . . . . . . . . .1Networking the StackMaster TX12 Hub . . . . . . . . . . . ....

Page 4 - The StackMaster TX12 Hub; StackMaster TX12 Hub Features; Optional cascading of hubs using SCSI connectors at back

StackMaster™ TX12 14 1 100BASE-TX 12-Port Stackable Hub 1. INTRODUCTION This guide is intended for the system or network administratorresponsible for installing and monitoring a TRANSITION NetworksStackMasterTX-12 100BASE-TX 12-Port Stackable Hub. A workingknowledge of local area network (LAN) opera...

Page 5 - Networking the StackMaster TX12 Hub; Warranty Statement

StackMaster™ TX12 2 13 100BASE-TX 12-Port Stackable Hub Networking the StackMaster TX12 Hub Use the StackMaster TX12 100BASE-TX 12 port stackable hub aloneto provide twelve RJ-45 Fast Ethernet port connections. Cascade two StackMaster TX12 hubs throough the uplink port toprovide twenty-two RJ-45 Fas...

Page 6 - Fault Isolation; Do network devices have Link Integrity enabled?; Technical Support Contact; Technical Support; or your local distributor.; SCSI Connectors; Status LEDs are located at the front of the StackMaster TX12.

StackMaster™ TX12 12 3 100BASE-TX 12-Port Stackable Hub 5. MAINTENANCE WARNING: DO NOT, UNDER ANY CIRCUMSTANCES,open and attempt to repair the StackMaster TX12 100BASE-TX 12-Port Stackable Hub. Failure to observe this warningcould result in personal injury or death from electricalshock. NOTE: Failur...

Page 7 - Status LEDs; SITE CONSIDERATIONS

StackMaster™ TX12 4 11 100BASE-TX 12-Port Stackable Hub 4. OPERATION The StackMaster TX12 normally requires no intervention beyondoccasionally monitoring the Power and Status LEDs. Status LEDs Status LEDs are located at the front of the StackMaster TX12. P OWER Illuminated green: Hub powered ON. U T...

Page 8 - Connecting Power to StackMaster TX12; Item

StackMaster™ TX12 10 5 100BASE-TX 12-Port Stackable Hub Connecting Power to StackMaster TX12 To power ON the StackMaster TX12: 1. Locate the power receptacle on the back of the StackMaster TX12. 2. Connect the StackMaster TX12 power connector end of the power cord to the StackMaster TX12. 3. Connect...

Page 9 - Installing StackMaster TX12 in 19-inch Rack

StackMaster™ TX12 100BASE-TX 12-Port Stackable Hub 6 9 Installing StackMaster TX12 in 19-inch Rack NOTE: Optionally, the StackMaster TX12 can be installed on a table orother flat, stable surface. NOTE: The StackMaster TX12 is shipped with attached brackets forstandard 19-inch rack installation. Rack...

Page 10 - Using SCSI Connectors to Cascade Stacked Hubs; Optionally Cascading 12-Port Stackable Hub; Using Port 12 to Cascade Two Hubs

Using SCSI Connectors to Cascade Stacked Hubs Up to six StackMaster™ TX12 hubs can be cascaded by installing SCSIconnectors at the back of the StackMaster™ TX12 stack. To cascade a StackMaster™ TX12 stack: NOTE: Install the SCSI cable by carefully pressing the cableconnector against the StackMaster™...