Transition Networks SISTF10XX-160-LR(T) - Manuals

Page 2 - Part Number; Part Number

2 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 * Typical maximum cable distance. Actual distance is dependent upon the physical characteristics of the network installation. Part Number Ports 1 - 6: Copper 10Base-T/100Base...

Page 3 - Ground the Ethernet Switch; Installation; Install the Fiber Cable; Install the Copper Cable

4 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 NOTE: The Ethernet switch is intended to be grounded to a well- grounded mounting surface such as a metal plate. Install the groundingwire prior to connecting any other devic...

Page 4 - Set the Port Alarm Switches; Install the Port Alarm Device; Please note the following when wiring the network:

6 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Set the Port Alarm Switches The port alarm feature is used to determine faults at the copper or fiber ports.The dip switches are located on the top ...

Page 5 - Power the Ethernet switch; WARNING: EXPLOSION HAZARD; AutoCross; Operation; Features; Switching and Address Learning

8 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Installation -- Continued Power the Ethernet switch This device is suitable for use in Class I, Division 2, Groups A, B, C and D ornon-hazardous locations only. WARNING: EXPL...

Page 6 - Status LEDs; Power and Fault LEDs; Fiber Port LEDs; Copper Port LEDs

10 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Operation -- Continued Status LEDs Use the status LEDs to monitor the Ethernet switch operation in the network. Power and Fault LEDs The three LEDs near the top indicate the...

Page 7 - Extended Temperature Models; Cable Specifications; Fiber Cable; Standard Models

[email protected] -- Click the “Transition Now” link for a live Web chat. 13 Cable Specifications -- Continued Extended Temperature Models SISTF1011-140-LRT SISTF1011-160-LRTSISTF1011-170-LRT 1300 nm multimode Fiber Optic Transmitter Power: min: -20.0 dBm max: -14.0 dBm Fiber Optic Receiver...

Page 8 - Copper Cable; OR; Technical Specifications

14 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Cable Specifications -- Continued Copper Cable Category 5: (minimum requirement) Gauge / Attenuation: 24 to 22 AWG / 22.0 dB per 100m @ 100 MHz • Straight-through OR crossov...

Page 9 - Technical Specification; Troubleshooting; ON; YES

16 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Test Description Test Levels IEC 60068-2-6 Vibration 10 - 500 - 10 Hz, 0.5 oct./min, 4g, X, Y, Z (3 axes) IEC 60068-2-27 Shock 50 g, 11 ms, +/-X, +/-Y, +/- Z (6 direction) I...

Page 10 - Contact Us

18 SISTF10xx-140-LR(T) / -160-LR(T) / -170-LR(T) 24-hour Technical Support: 1-800-260-1312 -- International: 00-1-952-941-7600 Troubleshooting -- Continued 5. Is a 100M LED (near the fiber links) flashing?NO • If there is activity on the corresponding fiber port, disconnect andreconnect the fiber ca...

Page 11 - Compliance Information; FCC Regulations

Trademark Notice All trademarks and registered trademarks are the property of their respective owners. Copyright Restrictions © 2004 Transition Networks.All rights reserved. No part of this work may be reproduced or used in any form or by anymeans - graphic, electronic, or mechanical - without writt...